Exhaust Particle Number in Off-Road Engines of Different Generations

Seppo Niemi; Kaj Lundin; Toomas Karhu; Mika Laurén; Krister Ekman; Pekka Nousiainen; Tommi Paanu

doi:10.4271/2009-01-1869

2009-06-15

Exhaust Particle Number in Off-Road Engines of Different Generations 2009-01-1869

In diesel engine development, NO_x and particulate matter (PM) emissions have to be simultaneously reduced. Fuel consumption also has to be kept as low as possible. Today, exhaust PM is regulated based on particle mass. Ultra-fine particles are, however, known to be hazardous for human health but they do not very much affect the PM mass. Thus, the health effects of an engine can not be evaluated based only on PM mass.

To assess the adverse effects of particles, the particle number should also be examined. In this study, particle number emissions were therefore analyzed in several off-road diesel engines of different ages. The engines were developed for low emissions and fuel consumption experimentally, by usually running them according to the 8-mode ISO 8178-4 C1 off-road test cycle. Modern low-sulfur diesel fuel oil was burned, the sulfur content of the batches varying from 8 to 60 mg/kg. In addition to regulated gaseous emissions, the exhaust smoke and particle number concentrations were determined. An ELPI analyzer was adopted for PM number recordings.

The results showed that the number of hazardous particles may be almost equally low in engines of the early 1990s as in modern ones, although the older engines emit more visible smoke.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Exhaust Particle Number in Off-Road Engines of Different Generations 2009-01-1869

SAE MOBILUS