Analysis of Load and Speed Transitions in an HCCI Engine Using 1-D Cycle Simulation and Thermal Networks 2006-01-1087
Exhaust gas rebreathing is considered to be a practical enabler that could be used in HCCI production engines. Recent experimental work at the University of Michigan demonstrates that the combustion characteristics of an HCCI engine using large amounts of hot residual gas by rebreathing are very sensitive to engine thermal conditions.
This computational study addresses HCCI engine operation with rebreathing, with emphasis on the effects of engine thermal conditions during transient periods. A 1-D cycle simulation with thermal networks is carried out under load and speed transitions. A knock integral auto-ignition model, a modified Woschni heat transfer model for HCCI engines and empirical correlations to define burn rate and combustion efficiency are incorporated into the engine cycle simulation model.
The simulation results show very different engine behavior during the thermal transient periods compared with steady state. Hot walls advance the ignition timing, while cold walls may result in misfire. Realizable operating regions during the thermal transitions are very dependent on the wall temperatures and are quite different from the steady state. This implies that thermal inertia must be considered in order to fully optimize HCCI engine operation.
Citation: Chang, K., Babajimopoulos, A., Lavoie, G., Filipi, Z. et al., "Analysis of Load and Speed Transitions in an HCCI Engine Using 1-D Cycle Simulation and Thermal Networks," SAE Technical Paper 2006-01-1087, 2006, https://doi.org/10.4271/2006-01-1087. Download Citation
Author(s):
Kyoungjoon Chang, Aristotelis Babajimopoulos, George A. Lavoie, Zoran Filipi, Dennis N. Assanis
Affiliated:
University of Michigan
Pages: 15
Event:
SAE 2006 World Congress & Exhibition
ISSN:
0148-7191
e-ISSN:
2688-3627
Also in:
Homogeneous Charge Compression Ignition (HCCI) Combustion 2006-SP-2005, SAE 2006 Transactions Journal of Engines-V115-3
Related Topics:
HCCI engines
Ignition timing
Heat transfer
Combustion and combustion processes
Simulation and modeling
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »