Nanoparticle Exhaust Gas Measurement: On-Line Response, High Sensitivity, Low Cost

Markus Kasper

doi:10.4271/2003-01-0286

2003-03-03

Nanoparticle Exhaust Gas Measurement: On-Line Response, High Sensitivity, Low Cost 2003-01-0286

Decreased particle concentration due to the use of particulate traps poses new challenges to particle measurement methods in terms of sensitivity and repeatability. In the present paper nanoparticle measurement methods are compared to gravimetric and Coulmetric analysis of filter samples from CVS sampling. Repeatability and sensitivity of the methods are assessed, and the influence of dilution and sampling is investigated.

It is shown that the repeatability of nanoparticle measurement methods is of the same order as that of PM measurement. In terms of sensitivity, nanoparticle methods are by three orders of magnitude better than today's PM and EC measurement. This provides a much better signal-to-noise ratio, especially when particle emissions are very low. While a gravimetric “zero” measurement may still contain a lot of nanoparticles, a “zero” with a nanoparticle method is by a factor 1000 closer to particle free air. However, in order to improve the repeatability of nanoparticle methods, existing calibration concepts have to be thoroughly developed.

Addressing the issue of dilution and sampling it is once more shown that condensation of vapors may lead to wrong conclusions about trap efficiency. Such erroneous results can be avoided by applying hot dilution and/or direct sampling, or by using material specific particle detection. A new problem occurs when testing trap equipped vehicles with standard CVS technique: In CVS systems the particle background of the dilution air is sometimes higher than the tailpipe particle emissions, thus making proper evaluation of the exhaust levels impossible.

Many nanoparticle instruments have a compact, rugged design at low cost, and they provide on-line response. As opposed to a CVS system, they do not require a roller dynamometer setup but can be mounted on a vehicle or truck. Due to these properties they are ideal candidates for in-use-compliance testing and even OBD instrumentation.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Nanoparticle Exhaust Gas Measurement: On-Line Response, High Sensitivity, Low Cost 2003-01-0286

SAE MOBILUS