Engine Crankcase Pumping Flow Model

Raj P. Ranganathan

doi:10.4271/1999-01-0215

1999-03-01

Engine Crankcase Pumping Flow Model 1999-01-0215

A transient, one-dimensional, two-phase (crankcase gases and liquids) flow network model was developed (and coded in FORTRAN) to calculate the crankcase pressures versus crank angle during engine operation and the consequent crankcase pumping mean effective pressure (CPMEP). The two-phase flow was represented by an empirical expression. Note, CPMEP is one of the components of engine FMEP (friction mean effective pressure) and is being introduced here as a new term. The model was calibrated with engine crankcase pressure measurements. The motivation for the present work was the fact that no commercial (or public domain) software is available to adequately address this subject in sufficient detail.

The model also predicts that closing (i.e. sealing) the individual bays of an engine can result in (nearly) zero CPMEP. This was confirmed by motored single cylinder engine measurements. In practical terms however, the bays cannot be sealed completely since a minimum flow area is required to facilitate drain-back of the oil and removal of the blowby gases from each bay. Therefore, some CPMEP expenditure cannot be avoided. However, an engine with nearly closed bays could spawn other advantages such as improved cylinder block structure, reduced engine volume, lower hood line etc. Meanwhile, at present, the (nearly) closed bay concept may only have minimal value until methods to deal with blowby and oil drain back from closed bays are developed.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Engine Crankcase Pumping Flow Model 1999-01-0215

SAE MOBILUS