Search Results

The main purpose of this paper will be to investigate if a small snowmobile gasoline Direct Injected (DI) two-stroke engine has the potential to be adapted for two other types of applications: as a range extender (REX) for electric vehicles and for a motorcycle application. For the REX application, the main requested specifications (NVH, lightweight, compactness, minimum production cost and easy maintenance), correspond well to the main features of DI 2-stroke engines. The potential of a modified production engine operating in part load ultra-low NOx Controlled Auto Ignition (CAI) to meet the Euro 6 emissions standards on the NEDC cycle has already been demonstrated in a previous paper. In the first part of this new paper, we will investigate which solutions can be used to maintain this potential with even stricter legislations based on Euro 6d, WLTP cycle and Real Driving Emissions (RDE).

The purpose of the European « SPACE LIGHT » (Whole SPACE combustion for LIGHT duty diesel vehicles) 3-year project launched in 2001 is to research and develop an innovative Homogeneous internal mixture Charged Compression Ignition (HCCI) for passenger cars diesel engine where the combustion process can take place simultaneously in the whole SPACE of the combustion chamber while providing almost no NOx and particulates emissions. This paper presents the whole project with the main R&D tasks necessary to comply with the industrial and technical objectives of the project. The research approach adopted is briefly described. It is then followed by a detailed description of the most recent progress achieved during the tasks recently undertaken. The methodology adopted starts from the research study of the in-cylinder combustion specifications necessary to achieve HCCI combustion from experimental single cylinder engines testing in premixed charged conditions.

New combustion processes known as Controlled Auto-Ignition (CAI™) for gasoline engine and Homogeneous Charge Compression Ignition (HCCI) for Diesel engine are the subject of extensive research worldwide and particularly at IFP. Because of the thermo-chemistry conditions of the charge, the thermal NOx formation is in principle much less than with flames typical of the conventional engines. Indeed, these new combustion processes bring NOx to virtually zero “1 digit” ppm while maintaining a very high thermodynamic efficiency of the combustion. One major issue in the development of CAI combustion for gasoline engines remains the limited engine speed and load range that can be operated in CAI combustion mode, while maintaining near zero NOx and acceptable noise emissions.

ELEVATE (European Low Emission V4 Automotive Two-stroke Engine) was a research project part funded by the European Commission to design and develop a compact and efficient gasoline two-stroke automotive engine. Five partners were involved in the project, IFP (Institut Français Du Pétrole) who were the project leaders, Lotus, Opcon (Autorotor and SEM), Politecnico di Milano and Queen's University Belfast. The general project targets were to achieve Euro 3 emissions compliance without DeNOx catalisation, and a power output of 120 kW at 5000 rev/min with maximum torque of 250 Nm at 2000 rev/min. Specific targets were a 15% reduction in fuel consumption compared to its four-stroke counterpart and a size and weight advantage over the four-stroke diesel with significant reduction in particulate and NOx emissions. This paper describes the design philosophy of the engine as well as the application of the various partner technologies used.

Engines and fuels for transport as well as off-road applications are facing a double challenge: bring local pollution to the level requested by the most stringent city air quality standard reduce CO2 emission in order to minimize the global warming risk. These goals stimulate new developments both of conventional and alternative engines and fuels technologies. New combustion processes known as Controlled Auto-Ignition (CAI™) for gasoline engine and Homogeneous Charge Compression Ignition (HCCI) for Diesel engine are the subject of extensive research world wide and particularly at IFP for various applications such as passenger cars, heavy-duty trucks and buses as well as small engines. Because of the thermo-chemistry of the charge, the thermal NOx formation and the soot production are in principle much lower than in flames typical of conventional engines.

The IAPAC® Direct fuel Injection (DI) system, developed by IFP, has already well proven its capability to reduce pollutants emissions and fuel consumption of 2-stroke engines for both 2-wheeler and marine outboard application. This crankcase Compressed Air Assisted Fuel Injection process allowing the introduction of the fuel separately from the scavenging air, minimizes the fuel short-circuiting and has shown its potential on various prototype demonstrators. This paper presents the development and pre-industrialization work performed to apply this concept to an SELVA Marine 2-cylinder 50 HP outboard 2-stroke engine. A standard carbureted engine has been converted to a IAPAC® prototype engine by mainly modifying the cylinder head. Then, this prototype engine has been calibrated, tested and optimized on the dyno test bench to comply with future emissions regulation while keeping similar power output than the reference carbureted engine.

The relative contribution of two wheelers to local atmosphere pollution is increasing more and more due to ultra low emissions regulation applied to other vehicle as cars. In 1999, the first European emissions regulations for 50cc mopeds and scooters appeared (Euro I) and will also become more and more severe by the time. Euro II (2002) level will correspond to the next step. IFP has developed a simplified Direct Injection technology, named SCIP™, derived from the well known IAPAC® technology without the need of additional camshaft. This technology has been integrated with the MC500 Engine Management System developed by SAGEM for the growing 2-wheelers application. The final simple and cheap product is therefore well adapted to small displacement 2-stroke engines as 50cc engine for 2-wheelers application. This paper presents the development of a 50 cc scooter engine using SCIP™ technology and the calibration of the MC500 System to achieve Euro II regulation.

In an optical accessible 4-stroke engine laser-induced fluorescence (LIF) imaging measurements of fuel tracer (3-pentanone) and formaldehyde were performed during the compression stroke and combustion. Formaldehyde (HCHO) is intermediately present at high concentrations within the cool flame and is burned later on when the “hot” combustion proceeds. It can be used as an internally generated tracer to observe the boundaries of the hot combustion zones. Despite the fact that a frequency-tripled Nd:YAG laser excites only weak transitions in the HCHO molecule, the high concentration (several thousands ppm) provide for sufficient signal intensity when detecting fluorescence above 395 nm. Using formaldehyde LIF, auto-ignition (occurring close to 356°ca) and the further development of combustion was observed.

The purpose of the 4-SPACE (4-Stroke Powered gasoline Auto-ignition Controlled combustion Engine) industrial research project is to research and develop an innovative controlled auto-ignition combustion process for lean burn automotive gasoline 4-stroke engines application. The engine concepts to be developed could have the potential to replace the existing stoichiometric / 3-way catalyst automotive spark ignition 4-stroke engines by offering the potential to meet the most stringent EURO 4 emissions limits in the year 2005 without requiring DeNOx catalyst technology. A reduction of fuel consumption and therefore of corresponding CO2 emissions of 15 to 20% in average urban conditions of use, is expected for the « 4-SPACE » lean burn 4-stroke engine with additional reduction of CO emissions.

The purpose of the ELEVATE (European Low Emission V4 Automotive Two-stroke Engine) industrial research project is to develop a small, compact, light weight, high torque and highly efficient clean gasoline 2-stroke engine of 120 kW which could industrially replace the relatively big existing automotive spark ignition or diesel 4-stroke engine used in the top of the mid size or in the large size vehicles, including the minivan vehicles used for multi people and family transportation. This new gasoline direct injection engine concept is based on the combined implementation on a 4-stroke bottom end of several 2-stroke engine innovative technologies such as the IAPAC compressed air assisted direct fuel injection, the CAI (Controlled Auto-Ignition) combustion process, the D2SC (Dual Delivery Screw SuperCharger) for both low pressure engine scavenging and higher pressure IAPAC air assisted DI and the ETV (Exhaust charge Trapping Valve).

The IAPAC Direct fuel Injection (DI) system, developed by IFP, has already well proven its capability to reduce pollutants emissions and fuel consumption of 2-stroke engines. This crankcase Compressed Air Assisted Fuel Injection Process allowing the introduction of the fuel separately from the scavenging air, minimizes the fuel short-circuiting. In earlier works, results of the implementation of the IAPAC system on cylinder displacement from 125 cc to 400 cc have been presented in various papers. These first prototypes were all using a camshaft to drive the IAPAC DI poppet valve, which was considered as a limitation for applying this system to small displacement 2-stroke engines. The new SCIP™ system is no more using a camshaft neither driveshaft, or any electric power supply to drive the DI air assisted injection valve.

The IAPAC Direct fuel Injection (DI) system, developed by IFP, has already well proven its capability to reduce pollutants emissions and fuel consumption of 2-stroke engines. This crankcase Compressed Air Assisted Fuel Injection Process allowing the introduction of the fuel separately from the scavenging air, minimizes the fuel short-circuiting. In earlier works, results of the implementation of the IAPAC system on cylinder displacement from 125 cc to 400 cc have been presented in various papers. These first prototypes were all using a camshaft to drive the IAPAC DI poppet valve, which was considered as a limitation for applying this system to small displacement 2-stroke engines. The new SCIP™ system is no more using a camshaft neither driveshaft, or any electric power supply to drive the DI air assisted injection valve.

The IAPAC Compressed Air Assisted Fuel Injection has been applied to the design and conception of a new 3 cylinder automotive 2-stroke engine of 1230 cc. This engine includes several innovations in addition to the IAPAC technology itself: fluid dynamically controlled combustion process (FDCCP), compactness with the block-integration of the IAPAC components, combined camshaft-balancing shaft, fixed exhaust port timing, … it presents particularly advantageous characteristics in terms of size and weight. The optimization of the different engine design parameters, before the installation of the engine in a vehicle, is presented in this paper. High engine trapping efficiency and smooth, stable and highly efficient light load auto-ignition combustion (ATAC) is controlled by the internal fluid dynamics. For the in-vehicle calibration, a fast catalyst lighting strategy has been implemented.

The implementation of the IFP developed Compressed Air Assisted Fuel Injection Process (named IAPAC) in a two-stroke engine allows the introduction of the fuel separately from the scavenging air, which in consequence minimizes fuel short-circuiting. The inherent mechanical principle of the IAPAC process which uses the crankcase compressed air to finely atomize the fuel, provides the advantages of direct injection but in addition uses conventional low pressure automotive type injection technology with commercially available gasoline injectors. In earlier work we showed an example of the application of this fuel injection technology to a PIAGGIO single cylinder 125 cc scooter two-stroke engine. In this paper, an update of the results obtained with this new engine is presented and confirms the ultra-low emissions capability for two-wheeler application.

The implementation of the IFP-developped Compressed Air Assisted Fuel Injection process (named IAPAC) on a two-stroke engine allows the introduction of the fuel separately from the scavenging air in order to minimize fuel short-circuiting. The IAPAC process does not require an external air pump since the compressed air used to atomize the fuel is supplied, at no expense, by the crankcase. The premixed charge is delivered directly into the cylinder with a high spray quality and its stratification, for optimized combustion, is controlled by a valve. This process, therefore, provides the advantages of the direct injection but uses conventional low-pressure automotive type injection technology with commercially available gasoline injectors. In earlier work we showed how the qualities of light weight, compactness, high specific power, high efficiency and low emissions make this concept particularly well-adapted for future automotive applications.

The implementation of the IFP-developped Compressed Air Assisted Fuel Injection process (named IAPAC) on a two-stroke engine allows the introduction of the fuel separately from the scavenging air in order to minimize fuel short-circuiting. The IAPAC process does not require an external air pump since the compressed air used to atomize the fuel is supplied, at no expense, by the crankcase. The premixed charge is delivered directly into the cylinder with a high spray quality and its stratification, for optimized combustion, is controlled by a valve. This process, therefore, provides the advantages of the direct injection but uses conventional low-pressure automotive type injection technology with commercially available gasoline injectors. In earlier work, we showed how the qualities of light weight, compactness, high specific power, high efficiency and low emissions make this concept particularly well-adapted for future automotive applications.

The implantation of the IFP-developed Compressed Air Assisted Fuel Injection process (IAPAC) in a two-stroke engine allows the introduction of the fuel separately from the scavenging air,in order to minimize fuel shortcircuiting. In earlier work, we achieved a drastic reduction of emissions using the IAPAC fuel injection process. Here, we give a precise analysis of the origin of the remaining pollution. The purpose of this analysis is to evaluate the real potential of a high efficiency two-stroke engine in comparison to conventional four-stroke engines, and to define the areas most needful of further development. The new results obtained pointed out how the IAPAC system is particularly well-adapted to take optimum advantages of the two-stroke-cycle principle.

A new concept for high efficiency two-stroke cycle spark-ignition engines has been developed. The installation of the IFP-developed pneumatic fuel injection process in a two-stroke engine allows the introduction of the fuel separately from the scavenging air, in order to minimize fuel shortcircuiting. The process does not require an external air pump since the compressed air used to atomize the fuel is supplied at no expense by the crankcase. The premixed charge is delivered directly into the cylinder with a high spray quality, its stratification for the optimization of combustion is controlled by a valve. This process, therefore, provides the advantages of the direct injection but uses commercially available gasoline injectors. A single-cylinder engine has been developed first to verify the potential of the process.