Search Results

Measurement assisted assembly is one of the key emerging technologies in airframe manufacture. The use of metrology to assist with the assembly process can significantly reduce the cost and complexity of the required fixtures as well as reducing manual labor input and assembly time. Most of the existing systems use a single metrology system but this paper describes the development and deployment of a network based system that allows the deployment of multiple metrology systems to support either a single task or multiple tasks simultaneously.

Transport is a significant contributor to global Carbon Dioxide and Nitrogen Oxide emissions. The VITAL (Environmentally Friendly Aero Engine) project is an integrated project funded under the European Union Sixth Framework programme that aims to design, manufacture and test the critical technologies required to produce cleaner low noise aero-engines. In particular, it should develop innovative technical solutions to reduce the engine's weight, thereby reducing fuel consumption and hence Carbon Dioxide emission. Prime candidates for weight reduction are the engine casings and structures. One way of achieving this is to move from a casting based manufacturing method to a fabrication method. The use of fabrications for these types of structures is not new and was indeed the standard methodology for older engine types. It was however abandoned in favour of castings due to the high costs associated with the complex fixtures required and the significant manual labour input needed.

The traditional use of simulation software in aerospace manufacturing applications has been as a pre-production tool for the validation of tool paths and the generation of robot programs. Once the process has been proven via simulation, the data is then transferred to the machine or robot and the production process executed. This is a linear approach in which the virtual and real systems are operated independently and in a serial manner. The current capabilities of offline programming (OLP) and simulation systems when combined with appropriate hardware in a flexible manufacturing environment now allow them to be used right at the heart of a manufacturing process, as an integral part of the manufacturing route. In a flexible manufacturing cell such as that developed at the University of Nottingham for the automated assembly and riveting of large aerostructures, a key driver is the need to reduce or eliminate complex and costly jigs and fixtures for part positioning.

This paper describes the final development and testing of a combined riveting and assembly cell for the manufacture of Regional Jet Fuselage panels. The cell consists of three industrial robots, two are used for riveting whilst the third is used for stringer placement. The cell has been tested using both simplified test parts and real airframe components. The paper describes the development and testing of the cell along with the enabling technologies that have been implemented to realise the cell.

The first concept and early experiments of a mechanical counter pressure (MCP) spacesuit were published by Webb in the late 1960's. MCP provides an alternative approach to the conventional full pressure suit that bears some significant advantages, such as increased mobility, dexterity, and tactility. The presented ongoing research provides a thorough investigation of the physiological effect of mechanical counter pressure applied onto the human skin. In this study, we investigated local microcirculatory effects produced with negative and positive ambient pressure on the lower body as a preliminary study for a lower body garment. The data indicates that the positive pressure was less tolerable than negative pressure. Lower body negative and positive pressure cause various responses in skin blood flow due to not only blood shifts but also direct exposure to pressure differentials.

The first concept and early experiments of a Mechanical Counter Pressure (MCP) spacesuit were published by Webb in the late 1960's. MCP provides an alternative approach to the conventional full pressure suit that bears some significant advantages, such as increased mobility, dexterity, and tactility. The presented ongoing research provides a thorough investigation of the physiological effect of mechanical counter pressure applied onto the human skin. In this study, we investigated local microcirculatory effects produced with negative and positive ambient pressure on a bare arm, and with a MCP glove and sleeve. The data indicates that the MCP glove and sleeve effectively counteracted the adverse effects of negative environmental pressure.

The first concept and early experiments of a Mechanical Counter Pressure (MCP) spacesuit were published by Webb in the late 1960’s. MCP provides an alternative approach to the conventional full pressure suit that bears some potential advantages, such as increased mobility, dexterity, and tactility. The presented ongoing research provides a thorough investigation of the physiological effect of mechanical counter pressure applied onto the human skin. Preliminary results are presented from glovebox testing with an existing MCP glove. The data indicates that properly applied mechanical counter pressure greatly reduces the effect of low-pressure exposure, which makes MCP a viable technology for spacesuit gloves.