Search Results

The reality of the autonomous vehicle in a near future is growing and is expected to induce significant change in the occupant posture with respect to a standard driving posture. The delegated driving would allow sleeping and/or resting in a seat with a reclined posture. However, the data in the literature are rare on the body kinematics, human tolerance, and injury types in such reclined postures. The current study aims at increasing the knowledge in the domain and providing useful data to assess the relevance of the standard injury assessment tools such as anthropomorphic test devices or finite element human body models. For that purpose, a test series of three male Post-Mortem Human Subjects (PMHS) were performed in frontal impact at a 13.4 m/s delta V. The backseat inclination was 58 degrees with respect to the vertical axis. The semi-rigid seat developed by Uriot et al. (2015) was used with a stiffer seat ramp.

The Test Device for Human Occupant Restraint (THOR) is an advanced crash test dummy designed for frontal impact. Originally released in a 50th percentile male version (THOR-50M), a female 5th version (THOR-05F) was prototyped in 2017 (Wang et al., 2017) and compared with biofidelity sub-system tests (Wang et al., 2018). The same year, Trosseille et al. (2018) published response corridors using nine 5th percentile female Post Mortem Human Subjects (PMHS) tested in three sled configurations, including both submarining and non-submarining cases. The goal of this paper is to provide an initial evaluation of the THOR-05F biofidelity in a full-scale sled test, by comparing its response with the PMHS corridors published by Trosseille et al. (2018). Significant similarities between PMHS and THOR-05F were observed: as in Trosseille et al. (2018), the THOR-05F did not submarine in configuration 1, and submarined in configurations 2 and 3.

Obese vehicle occupants sustain specific injury patterns in case of accidents in which the interaction between the seat belt and the abdomen may play a role. This study aimed to collect geometrical characteristics and to investigate the mechanical responses of the abdomen of obese subjects. Four Post Mortem Human Subjects (PMHS) with BMI ranging from 31 to 46 kg/m2 were collected. CT-scans performed in the seated position revealed that the antero-posterior depth of the abdominal fold (from the inguinal region to the most anterior point of the abdominal surface) was much greater (170 mm max., 127 mm average) than the thickness of subcutaneous adipose tissues (85 max., 38 mm in average). Each PMHS was subjected to three infra-injurious antero-posterior belt pulls in a seated posture with a lap belt positioned (C1) superior to the umbilicus, (C2) inferior to the umbilicus, (C3) inside the abdominal fold between the abdomen and the thigh.

In the last decade, extensive efforts have been made to understand the physics of submarining and its consequences in terms of abdominal injuries. For that purpose, 27 Post Mortem Human Subject (PMHS) tests were performed in well controlled conditions on a sled and response corridors were provided to assess the biofidelity of dummies or human body models. All these efforts were based on the 50th percentile male. In parallel, efforts were initiated to transfer the understanding of submarining and the prediction criteria to the THOR dummies. Both the biofidelity targets and the criteria were scaled down from the 50th percentile male to the 5th percentile THOR female. The objective of this project was to run a set of reference PMHS tests in order to check the biofidelity of the THOR F05 in terms of submarining. Three series of tests were performed on nine PMHS, the first one was designed to avoid submarining, the second and third ones were designed to result in submarining.

Sled tests focused on pelvis behavior and submarining can be found in the literature. However, they were performed either with rigid seats or with commercial seats. The objective of this study was to get reference tests to assess the submarining ability of dummies in more realistic conditions than on rigid seat, but still in a repeatable and reproducible setup. For this purpose, a semi-rigid seat was developed, which mimics the behavior of real seats, although it is made of rigid plates and springs that are easy to reproduce and simulate with an FE model. In total, eight PMHS sled tests were performed on this semi-rigid seat to get data in two different configurations: first in a front seat configuration that was designed to prevent submarining, then in a rear seat configuration with adjusted spring stiffness to generate submarining. All subjects sustained extensive rib fractures from the shoulder belt loading.