Search Results

The intake process plays an important role in the operation of internal combustion engines. In the present study, a three-dimensional transient simulation of a four-valve diesel engine was performed using Large Eddy Simulation (LES) model based on software CONVERGE. The mean velocity components in three directions through the intake valve curtain, the flow separation around the intake valves, the influences of inlet jet on turbulence flow field and cycle-to-cycle variation were investigated in this work. The result shows that the mean velocity distributes non-uniformly near the valve curtain at high valve lifts. In contrast, the mean velocity distribution is uniform at low valve lifts. It is found that the flow separation occurs at valve stem, valve seat and valve sealing through the outlet of the helical port. In contrast, flow separation is only observed in the valve seat through the outlet of the tangential port.

Piston bowl geometry has important effects on diesel engine combustion. Especially for a high power density engine, much more fuel requires to burn across the cylinder in a short period after the top dead centre (TDC). Therefore the piston bowl geometry plays a critical role for the air/fuel mixing process and the combustion process. In this paper, a 3-D in-cylinder combustion modeling was carried out for a high power density engine. The ω type of bowl shape was described by seven independent parameters. Five of them are conducted to investigate their effects on the combustion process. The results show that the bowl diameter has significant effects on combustion both in the pre-mixing combustion period and in the diffusion combustion period. There exists an optimized bowl diameter value to obtain a highest indicated power. The re-entrant angle has an important effect on pre-mixing combustion and there also exists an optimized value to reach a highest indicated power.