Search Results

Flash boiling occurs when a liquid which initially is in a subcooled state, rapidly depressurized to a pressure sufficiently below saturation pressure to initiate a rapid boiling process. This phenomenon can be applied to improve fuel atomization in spark-ignition engines. In the present work, the characteristics of the generated spray were investigated experimentally. This is in order to establishing a designer guideline, for this high potential type of fuel injectors. The following conclusions have been derived: 1. A typical droplets Sauter mean diameter in the range of 20-40μm can easily be achieved with the present simple fuel injection system. 2. The SMD decreases with the increasing in the mole fraction of the propellant; at high pressure however (high propellant content), the SMD is less and less affected. 3. The SMD and the droplets' uniformity are independent of the orifices' size. 4. The SMD increases with the axial distance. 5.