Search Results

This paper outlines the second part in a series on the effect of polymeric additives commonly known as viscosity modifiers (VM) or viscosity index improvers (VII) on gear oil efficiency and durability. The main role of the VM is to improve cold temperature lubrication and reduce the rate of viscosity reduction as the gear oil warms to operating temperature. However, in addition to improved operating efficiency across a broad temperature range compared to monograde fluids the VM can impart a number of other significant rheological improvements to the fluid [1]. This paper expands on the first paper in the series [2], covering further aspects in fluid efficiency, the effect of VM chemistry on these and their relationship to differences in hypoid and spur gear rig efficiency testing. Numerous VM chemistry types are available and the VM chemistry and shear stability is key to fluid efficiency and durability.

The ASTM D6121 (L-37) is a key hypoid gear lubricant durability test for ASTM D7450-08 (API Category GL-5) and the higher performance level SAE J2360. It is defined as the ‘Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles’. Pass/fail is determined upon completion of the test by rating the pinion and ring gears for several types of surface distress, including wear, rippling, ridging, pitting, spalling and scoring. Passing the L-37 in addition to the other tests required for API Category GL-5 credentials, as well as the more strenuous SAE J2360 certification, requires in-depth formulating knowledge to appropriately balance the additive chemistry. This paper describes the results of ASTM D6121 experiments run for the purposes of better understanding gear oil durability.

This paper is part one of a longer term comparison of viscosity modifier behavior in modern automotive gear oil (AGO) fluids and the impact of these properties on fluid efficiency and durability. This first installment will compare the rheological properties, including EHD film thickness and traction coefficients, of the fluids across broad operating temperature, shear and load regimes and correlate these findings with rig efficiency testing. The effects of traction, EHD film thickness and high shear rheology on operating temperature are well documented and it is of particular interest to determine the extent to which different viscosity modifiers can beneficially impact these properties compared to a Brightstock-based SAE 80W90 grade fluid. The efficiency improvements of a VM would be for naught if it were not sufficiently shear stable and so comparisons are made between shear stable VM technologies.