Search Results

The combustion of highly boosted gasoline engines is limited by knocking combustion and pre-ignition. Therefore, a comprehensive modelling approach consisting of cycle-to-cycle simulation, reactor modelling with detailed chemistry and CFD-simulation was used to predict the knock initiation and to identify the source of pre-ignition. A 4-cylinder DISI test engine was set up and operated at low engine speeds and high boost pressures in order to verify the accuracy of the numerical approach. The investigations showed that there is a correlation between the knocking combustion and the very first combustion phase. The onset of knock was simulated with a stochastic reactor model and detailed chemistry. In parallel, measurements with an optical spark plug were carried out in order to identify the location of knock onset. The simulation results were in good agreement with the measurements. Deposits and oil/fuel-droplets are possible triggers of pre-ignition.

A naturally aspirated SI engine with port fuel injection was investigated at the Institute for Powertrains and Automotive Technology of the Vienna University of Technology to analyze the impact of the ethanol blend E85 on the full load performance. Measurements and numerical studies with a predictive wall film model have been carried out to explain the mixture cooling, the calorific fluid properties after inlet valve closing and the volumetric efficiency with conventional fuel and E85. It could be shown that only with a detailed modelling of the wall film formation in the inlet port an accurate prediction of the engine's full load performance is possible when studying different fuels with varying fluid properties. Anyway, an integrated approach that includes measurements and numerical investigations is necessary to analyse the mixture preparation and the engine process correctly.