Search Results

Tailored blanks have been produced by a variety of welding processes. Currently, laser welding and mash seam welding are commonly used to produce steel blanks for automotive stampings. Because of the high electrical and thermal conductivity of aluminum, mash seam welding is generally not suitable for this application. Laser welding is currently in the developmental stage for welding aluminum. Reynolds Metals Company is investigating another existing welding technology -- Gas Tungsten Arc Welding (GTAW)--for welding of aluminum tailored blanks. Using the GTAW process, production weld speeds approximating those of laser systems can be obtained. Additionally, good control of weld geometry and quality can be easily attained. This study focuses on GTA welding process parameters for joining various alloys, tempers, and thickness of aluminum. Additionally, performance of welded joints in terms of strength, ductility, and formability are discussed.

A discussion of the impact of a 2.5 mph bumper standard on aluminum sheet and extruded bumpers is presented. Information is presented on energy management systems, bumper shape, and dentability. This information can be used to determine whether a sheet or extruded bumper is the most efficient for a particular application.

A discussion of aluminum bumper systems, alloy data fabrication performance, and costs are presented. Weights and costs of similar steel, aluminum, and urethane face systems are compared and the effect of weight savings on costs and fuel economy is determined. Areas for product improvements are explored.

This paper discusses the problems associated with aluminum/steel bimetallic panels such as warping in paint bake cycles, paint peeling and other corrosion effects. Several joining methods used for bimetallic assemblies, such as stapling, adhesive bonding and spot welding are presented. Corrosion test data is presented to indicate the favorable and unfavorable reactions of different paint systems and to compare the different joining procedures used on the bimetallic aluminum/steel panels.

A new type plated electrode has been developed which shows considerable promise for spot welding mill finish and mechanically cleaned aluminum sheet. This electrode consists of preconditioning the tips of regular Class I and Class II electrodes followed by an inexpensive electroplating of dull nickel. Laboratory data has shown that 2000 spots can be made on mill finished 2036 aluminum using this plated electrode. On wirebrushed 5182-0, 3750 welds were made before failure occurred. This represents a significant increase in tip life compared to tests run using regular copper electrodes. The paper gives details as to how the nickel plated electrodes were developed. This includes results from evaluating other electrode plating and capping materials. The results of tests run using the plated electrodes are included as part of the paper, as well as a discussion as to why the nickel plating works when spot welding aluminum.