Search Results

The application of local advanced steels has challenges to overcome such as stampability requirements to meet manufacturing processes. Several technological alternatives have been studied to improve sheet steel formability and this work focuses on material selection. Dual Phase 800 steel has an important performance for structural parts involved in body-in-white (BIW) to reach durability and material impact resistance. On those alternatives references the coating application to reduce the friction coefficient and makes the formability process easier to mitigate drawing stamping issues. The study deals with DP800 formability analysis applied in automotive seats, mainly on anchorage components, searching for alternatives to a better material stampability and local availability with a lower cost. These tests approached formability simulations and FLD (Forming Limit Diagrams) to compare the imported DP800-Uncoated and the local DP800EG + Phosphate steels.

Studying the formation and distribution of residual stress fields will improve the wheel safety operational criteria among other gains. Many engineering specifications, manufacturing procedures, inspection and quality control have begun to require that the residual stress of a particular component to be evaluated. It is known that these residual stress fields could be added to the effects of a system load (tare weight plus occupation of vehicle, traction, braking and torque combined). The mathematical tools for modeling and simulations using finite elements had evolved following the increasing computing power and hardware cost reduction. On the other hand, the experimental testing, offers specific physical component behavior and with the use of statistical tools, it is possible to predict the real behavior of the component when in operation. The experiments undertaken used the X-ray diffraction technique and the drilling method with rosette type strain gages.

This work conducted an optimization in sheet metal blank's sizes for cold pressing automotive parts, comparing dimensional characteristics of automotive hood outer panels deep drawn with commonly used blank sizes for this process. As a result, it was possible to suggest modifications to smaller blank sizes, accordingly to the improvement accomplished in this work. The experimental study was conducted from observations in part's superficial aspects after its deep drawing process, which was realized in a commonly used tooling for automotive industry, with a blank's width reduction for the suggested case. The results showed a cost reduction opportunity based in this optimization.

The current study shows interesting results obtained by a new virtual approaching for evaluating the final stresses presented in automotive components during its application in vehicle which suggests product engineers a new tool for measuring the residual stresses in casting. As part of this proposal, an automotive as-cast aluminum wheel belong to current production was evaluated in accordance with data acquired in its manufacturing process. At that step, it was taking into account the real information of casting process parameters and the metallurgic results obtained in laboratorial tests such as, metallographic, chemical and mechanical tests. FEA (Finite Element Analysis) on simulation of wheel loading stress was made regarding those preliminary data obtained in CRSFEA simulation (cast residual stress finite element analysis) as entered parameters.

The nitriding process improves in some applications the fatigue resistance of mechanical components. There is a lack of information about the nitriding process effect on the toughness of components. It is well known that the austempering heat treatment improves the toughness of the nodular cast iron. Some efforts have been made to find a compromise between the toughness of the bainitic structure of nodular cast iron and the high wear resistance undertaken by the nitriding process. Nitriding causes smaller dimensional problems if compared with other termochemical processes in steel and cast iron, but during exposure to the nitriding temperature the stabilized austenite of the nodular cast iron bainite may decompose, and induce component distortion. It is well known that the stabilized austenite is responsible for high toughness of the nodular cast iron.