Search Results

Previous studies have shown that car seat properties play an important role for the occupant protection during various types of accidents. An improved understanding of the interaction between the occupant and the seat is therefore desirable, since this could lead to enhanced protective capacities of future car seats. In this work a test-rig has been developed and constructed, by means of which it is possible to study the response from various seats during frontal collisions. With small modifications the test-rig can be utilized to study other collision directions as well. The rig has been used in a test series, which comprises four car seats in altogether 14 tests. In order to evaluate the interaction between the seat and the dummy, measurements have been made on: the seat frame; the floor connections; the seat belt; the submarine-beam; and on several locations in the dummy.

An ordinary rigid bumper system and a compliant bumper system for pedestrian protection developed by the NHTSA, US Department of Transportation, were compared in an experimental study of leg injuries in car-pedestrian accidents. Human leg specimens were struck in 20 experiments with a production car front using the two bumper types. Impacts were made with an ordinary front configuration with the bumpers at the 45 cm level and a 12.5 cm lower front configuration with the bumpers at the 32.5 cm level. The impact velocity was 30-32 km/h. Serious leg injuries were noted with both front configurations and bumper types. The compliant bumper seemed to cause less serious injuries than the rigid one, and the lower front configuration seemed to cause less serious injuries than the ordinary one. A lower bumper level than today's standard and a compliant bumper type is recommended in combination to reduce the risk of serious leg injuries in car-pedestrian accidents.