Search Results

The catalytic performance and On-Board Diagnostics (OBD) of the manifold catalyst having high Oxygen Storage Capacity (OSC) are described in this paper. First of all, we compared the performance of three-way catalysts containing Cerium - Zirconium - Yttrium oxide with Cerium - Zirconium oxide. Three-way catalysts dispersed Pt, Rh and Pd on Cerium - Zirconium - Yttrium oxide showed excellent catalytic performance especially at cold starting and at transient states, after high temperature aging at 1050°C. The performance of these catalysts was studied using the Driving Mode Simulation Dynamometer, which was developed in-house, and oxygen storage and release responses were compared in actual gas. Then we investigated the possibility of on-board diagnostics of catalyst deactivation with high OSC in manifold and close-coupled positions, a diagnostic which is usually assumed to be difficult to attain with present conventional technology.

Cerium oxide (CeO2) is known to have good oxygen storage capacity (OSC) and is used widely in three-way catalysts for automobiles, but it has a problem of inferior heat stability. In our previous work, cerium-zirconiumyttrium (Ce Zr-Y) oxide systems were investigated with the aim of improving the heat stability of CeO2-based oxide systems, and we found an optimum composition of Ce-Zr-Y oxide with platinum (Pt) showed good OSC even after high temperature aging. In this study OSC and thermal stability of Ce-Zr-Y oxide with varying the types of precious metals were investigated to evaluate the effect of precious metals. The results show that, Palladium (Pd) and Rhodium (Rh) are also available for Ce-Zr-Y oxide with precious metal system to improve OSC after thermal aging. In particular, Rh exhibited higher improvement than others at the composition of lower Ce content.

It is necessary to mount a three-way catalyst at a place near the engine such as a close coupled converter or manifold converter to decrease cold-start emission. Naturally, in that case the catalyst of course is used under considerable A/F fluctuations at higher temperatures. We have developed a catalyst with excellent durability under such severe conditions. Three types of catalysts, made with different loading locations of precious metals, were evaluated using model gases. Durability was found to strongly depend on the loading location, and thus it should be possible to design an optimal catalyst for close coupled and manifold converters.

Some research and development studies concerning Mitsubishi DC2 diesel engines are described. The engines are of 90-deg V type newly designed, for trucks or buses of more than 14 tons (30,900 lb) gross weight, after exhaustive fundamental researches and many years' experience. The series covers 6-, 8-, and 12-cyl engines of the water-cooled, precombustion-chamber type with a 130-mm (5.12 in.) bore and a 125-mm (4.92 in.) stroke. The engines are capable of developing a maximum output of 200-400 ps (197.5 ∼ 395 hp) and combine high reliability with compact and light-weight construction. Naturally the use of common parts among these engines in series facilitates their parts' supply and maintenance. In addition to the naturally aspirated engines, turbocharged 8- and 12- cyl engines are available.