Search Results

A lithium ion battery system has been developed for use in Honda's FCX Clarity fuel cell vehicle. This represents the first time that Honda has employed lithium ion batteries. The battery system equals the high level of power of the ultracapacitor system used in the previous FCX vehicle but achieves a higher level of energy, contributing to various improvements in performance, such as the Clarity's superior acceleration feel and improved fuel efficiency. The system displays sufficient durability and reliability at the same time as satisfying requirements from the perspective of safety. In addition, positioning the battery system under the floor of the vehicle has increased cabin space, boosting the Clarity's commercial appeal.

Today, most widely used synchronizer rings (SNRs) are made of brass (brass SNR). The development of superior SNR to brass SNR has been required for both shift feeling and durability, which are two important requirements for SNRs. Carbon-based friction material (carbon material) is selected to develop superior friction material to brass because carbon material is one of the most durable materials for an application of clutch and brake. Carbon material is placed on the friction surface of SNR (carbon SNR). The structure of carbon material, kinds of raw materials and their combination ratio are selected and optimized. The carbon SNR is confirmed to have higher performance than brass SNR for both shift feeling and durability. At present, our carbon SNRs have been introduced into pickup trucks and SUVs in USA.

As the recent automotive engines are designed for higher performance, the rotating speed of the engines have been increased drastically. Therefore the engine bearings should be further improved to have better anti-seizure and wear properties under the high temperature at the high rotating speed. The authors have analyzed the necessary functions of the three layers copper-lead bearings at such operating conditions, and then improved and developed the overlay and the copper based bearing alloy with steel back. Physical and chemical properties for this new bearing were studied. Then the bearing performance tests were carried out including the high speed seizure tests and engine tests. From these test results, it was confirmed that this new bearing could be applied for the recent very high speed automotive engines.