Search Results

The valve train was instrumented to record the instantaneous roller speed, roller pin friction torque, pushrod forces, and cam speed. Results are presented for one exhaust valve of a motored Cummins L-10 engine. The instantaneous cam/roller friction force was determined from the instantaneous roller speed and the pin friction torque. The pushrod force and displacement were also measured. Friction work loss was determined for both cam and roller interface as well as the upper valve train which includes the valve pushrod, rocker arm, valve guide, and valve. Roller follower slippage on the cam was also determined. A kinematic analysis with the measured data provided the normal force and contact stress at cam/roller interface.(1) Finally, the valve train friction was found to be in the mixed lubrication regime.(2) Further efforts will address the theoretical analysis of valve train friction to predict roller slippage.

A new bench tester for laboratory simulation of piston ring and cylinder wear has been developed. Tests are made using liner segments which bear against a reciprocating piston ring. Temperatures up to 550°C, and loads and speeds representative of the most severe top ring conditions may be imposed. A precision oil spray system delivers the desired quantity and quality of oil to the wear interface. The computer controlled simulator duplicates the desired test cycle, and displays and stores data on friction forces and friction coefficients as the test proceeds. In this paper results are presented from the simulator for production and prototype ring and liner combinations, including ceramic coatings for potential use in advanced diesel engines. The importance of the method of oil delivery on test repeatability is emphasized. Some comparisons with Cameron Plint bench tests and firing engine results are presented.