Search Results

Ethanol-gasoline blends are widely understood to present certain technical challenges to engine operation. Despite widespread use of fuels ranging from E5 (5% ethanol in gasoline) in some European countries to E10 (10% ethanol) in the United States to E100 (100% ethanol; “alcool”) in Brazil, there are certain subjects which have only anecdotally been examined. This paper examines two such issues: the effect of ethanol on intake valve deposits (IVD) and the impact of fuel additive on filter plugging (a measure of solubility). The effect of ethanol on IVD is studied along two lines of investigation: the effect of E10 in a multi-fuel data set carried out in the BMW 318i used for EPA and CARB certification, and the effect of varying ethanol content from 0% to 85% in gasoline carried out in a modern flex-fuel vehicle.

In response to industry demands for a method to qualify fuels for their intake valve deposit (IVD) forming tendencies, the Coordinating Research Council (CRC) has developed an engine dynamometer test procedure. In Phase I, the 2.3L Ford engine was chosen as the focus test engine in comparison testing with two other high volume U.S. manufactured engines.1* A two-mode dynamometer test was developed in Phases II-A & II-B and shown to discriminate among the test fuels at a 95% confidence level.2 In Phase III, both an interlaboratory study (ILS) of the two-mode dynamometer test and a vehicle fleet study were performed. The ILS was conducted to determine the repeatability and reproducibility of the test procedure and also to fulfill requirements for consideration of the test as an American Society for Testing and Materials (ASTM) standard.