Search Results

Piston bowl geometry has important effects on diesel engine combustion. Especially for a high power density engine, much more fuel requires to burn across the cylinder in a short period after the top dead centre (TDC). Therefore the piston bowl geometry plays a critical role for the air/fuel mixing process and the combustion process. In this paper, a 3-D in-cylinder combustion modeling was carried out for a high power density engine. The ω type of bowl shape was described by seven independent parameters. Five of them are conducted to investigate their effects on the combustion process. The results show that the bowl diameter has significant effects on combustion both in the pre-mixing combustion period and in the diffusion combustion period. There exists an optimized bowl diameter value to obtain a highest indicated power. The re-entrant angle has an important effect on pre-mixing combustion and there also exists an optimized value to reach a highest indicated power.

Computational Fluid Dynamics (CFD), as an effective analytical tool, has been applied at China North Engine Research Institute (CNERI) for combustion chamber design and combustion system optimization on a V8 heavy -duty diesel engine in order to meet increasingly stringent emission targets. The design of combustion system involves great number of parameteric optimizations such as the number of nozzle holes, the spray angle, the swirl ratio and the piston bowl shape. 3-D CFD was a convenient and cheap tool to explore the effects of all these parameters to the engine performance, compared with extensive hardware testing. 1-D modeling was used to set up boundary conditions at intake valve closure for 3-D CFD modeling during the closed-cycle. AVL FIRE software with a widely used combustion model, ECFM-3Z model, was used for 3-D simulation. Two sets of nozzle holes, four spray angles and three swirl levels were utilized and optimized under rated power.