Search Results

Tire mechanical property data from several radial-ply aircraft tires have been analyzed and compared to empirical bias-ply tire property models developed by the National Aeronautics and Space Administration (NASA) in the late 1950’s. Radial tire data from high-speed testing on the NASA Aircraft Landing Dynamics Facility and low-speed radial-ply tire data obtained from qualification testing by various tire manufacturers are compared to the empirical bias-ply models. Data from the NASA tests and the tire manufacturer qualification tests show similar trends. Measured tire mechanical properties computed from both radial-ply data sets are in disagreement with the predicted tire material properties computed from the NASA bias-ply models.

The characteristics of the friction materials used in aircraft brakes are extremely important to the performance and safe operation of transport airplanes. These characteristics can change during exposure to environmental effects in the duty cycle, which can lead to problems, such as abnormally low friction, or brake induced vibration. Water vapor in the atmosphere produces a direct lubricant effect on carbon. Observed transition temperatures within the range of 140°C to 200°C, associated with increases in friction and wear of carbon brake materials, are attributed to water vapor desorption. Friction and wear transitions in the range of 500°C to 900°C may be associated with oxygen desorption.

A computational procedure is presented for evaluating the analytic sensitivity derivatives of the tire response with respect to material and geometrical properties of the tire. The tire is modeled by using a two-dimensional laminated anisotropic shell theory with the effects of variation in material and geometric parameters included. The computational procedure is applied to the case of the Space Shuttle orbiter nose-gear tire subjected to uniform inflation pressure. Numerical results are presented which show the sensitivity of the different tire response quantities to variations in the material characteristics of both the cord and rubber.

A computational procedure is presented for the solution of frictionless contact problems of aircraft tires. The space shuttle nose-gear tire is modeled using a two-dimensional laminated anisotropic shell theory with the effects of variation in material and geometric parameters, transverse shear deformation, and geometric nonlinearities included. The contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the stress resultants, the generalized displacements, and the Lagrange multipliers associated with the contact conditions. The elemental arrays are obtained by using a modified two-field mixed variational principle. Numerical results are presented for the shuttle nose-gear tire when subjected to inflation pressure and pressed against a rigid pavement. Comparison is made with the experiments conducted at NASA Langley.

The Aircraft Landing Dynamics Facility (ALDF), formerly called the Landing Loads Track, is described. The paper gives a historical overview of the original NASA Langley Research Center Landing Loads Track and discusses the unique features of this national test facility. Comparisions are made between the original track characteristics and the new capabilities of the Aircraft Landing Dynamics Facility following the recently completed facility update. Details of the new propulsion and arresting gear systems are presented along with the novel features of the new high-speed carriage. The data acquisition system is described and the paper concludes with a review of future test programs.

NASA antiskid braking system research programs are reviewed. These programs include experimental studies of four antiskid systems on the Langley Landing Loads Track, flight tests with a DC-9 airplane, and computer simulation studies. Results from these research efforts include identification of factors contributing to degraded antiskid performance under adverse weather conditions, tire tread temperature measurements during antiskid braking on dry runway surfaces, and an assessment of the accuracy of various brake pressure-torque computer models. This information should lead to the development of better antiskid systems in the future.