Search Results

In the last few years the requirement to optimize powertrain noise and vibration has increased significantly. This was caused by the demand to fulfill the vehicle's exterior noise legislative limits in Europe, and by increased customer awareness for high ride comfort. Much effort concentrated on the engine and the powertrain as prime sources of noise and vibration in a vehicle. The cranktrain with its moving components is a significant source of noise and vibration excitation within the engine. This paper describes results of investigations to evaluate various design alternatives in respect to NVH. The influences of crankshaft material, of balancing rate and of secondary shaking forces are discussed, with the aim to evaluate these various design options.

Ford introduced a new in-line 4-cylinder 2.3L DOHC 16-valve engine in its European D-class Scorpio vehicle. The engine is based on the proven 2.0L-DOHC engine with 8 or 16 valves. The new engine replaces the 2.0L DOHC 8-valve version. Primary focus of the development of this new 2.3L engine was on the noise and vibration improvement, both for the engine and for the vehicle interior noise. One measure to achieve this target was the application of balance shafts. In this paper, the development of the new engine will be described from the design stage to the production version. It will focus on the design of the balance shaft housing and all relevant engine NVH features. The various stages of the design and detailed optimization are explained. The NVH prediction by CAE methods is verified with experimental results. The influence of optimized components like the oil pan, front cover and the chain tensioner on the noise behavior will be discussed.

The NVH optimization is a key issue for the development of future powertrains. This includes the radiated noise in terms of noise level and sound quality as well as the structure-borne noise excitation via the engine mounts. Experience shows that there are generally no single noise relevant components on modern powertrains which dominate the NVH behaviour. In contrast, a good NVH performance can only be achieved if the optimization process includes every single component and excitation. Only the combination of these optimized designs can lead to a first-class powertrain NVH. Within this paper the NVH optimization process of an existing 4-cylinder in-line spark-ignition powertrain is described. Examples for positive NVH designs are presented and their effect on the NVH behaviour are explained. Combining all positive NVH features into the engine resulted in a noise reduction of 3-5 dBA without any negative effect on fuel economy and performance.