Search Results

The development of a durable adhesive bonding technology for joining of aluminium automotive structures requires a full understanding of the importance of the environment on the chemistry of the adhesively bonded system. This paper describes the accelerated testing procedures used by Alcan to provide information on the significance of environmental factors on adherend surface, the bonding interface and adhesive and so establish the best combination of adhesive and surface pretreatment for good long term durability. The stress/humidity test provides information on adhesive and interface performance, while the neutral salt spray test illustrates durability and corrosion resistance of the pretreatment. Outdoor exposure testing provides the means of comparing the accelerated tests with real life durability.

The paper summarises work which has been carried out to establish the sensitivity of the Alcan AVT weld-bonding system to manufacturing process variability. The robustness of the joint-line to factors such as panel fit-up, bondline thickness, adhesive fillet size and missing adhesive is discussed and their effects demonstrated. Manufacturing factors, such as pretreatment damage during part forming and the cure-cycle window for the adhesive, are considered and their effects on performance are indicated. Finally the effect of a series of manufacturing shortfalls and environmental factors have been put together in one experiment and the resulting strength and fatigue performance of bonded joints has been established.