Search Results

A sulfur analyzer utilizing an ultraviolet fluorescent (UVF) detector has been developed to measure sulfur components in vehicle emissions. Generally, it is considered that an UVF detector cannot be used to measure sulfur components in vehicle emission due to a significant interference from NO in sample gases. In this study, an O3 injection technique has been developed to eliminate NO interference. Using this technique, the interference from NO has been reduced to less than 0.01 ppm with 3000 ppm NO. These result show a capability of utilizing UVF with this O3 injection technique to measure sulfur components in vehicle emissions including emissions with high concentrations of NO. An oxidation catalyst has also been evaluated to measure total reduced sulfur, TRS.

The effect of ambient gas hydrocarbon content on diesel spray ignition and combustion was examined in this research project. A single-stroke rapid compression machine was used to prepare the ambient gas pressure and temperature before the diesel fuel injection process. Variations of ambient gas composition were achieved by adding different quantities of methane and propane to the intake air, the content ranged from 0.0 to 0.6 equivalence ratio. The two-color method was applied to analyze the flame temperature and KL factor was determined from the colored flame image taken by a high-speed camera. Also, compression ignition characteristics of lean methane-air and propane-air mixtures were examined.