Search Results

Managing the injection rate profile is a powerful tool to control engine performance and emission levels. In particular, Common Rail (C.R.) injection systems allow an almost completely flexible fuel injection event in DI-diesel engines by permitting a free mapping of the start of injection, injection pressure, rate of injection and, in the near future, multiple injections. This research deals with the development of a network-based numerical tool for understanding operating condition limits of the Common Rail injector. The models simulate the electro-fluid-mechanical behavior of the injector accounting for cavitation in the nozzle holes. Validation against experiments has been performed. The model has been used to provide insight into the operating conditions of the injector and in order to highlight the application to injection system design.

The aim of this work is to propose modifications to the managing of the 1st generation Common Rail injectors in order to reduce actuation time towards multiple injection strategies. The current Common Rail injector driven by 1st ECU generation is capable of operating under stable conditions with a minimum dwell between two consecutive injections of 1.8 ms. This limits the possibility in using proper and efficient injection strategies for emission control purposes. A previous numerical study, performed by the electro-fluid-mechanical model built up by Matlab-Simulink environment, highlighted different area where injector may be improved with particular emphasis on electronic driving circuit and components design. Experiments carried out at injector Bosch test-bench showed that a proper control of the solenoid valve allowed reducing drastically the standard deviation during the pilot pulses.

The aim of this work is to investigate Common Rail injector behavior towards multiple injection strategies. A numerical model has been developed to simulate the electro-fluid-mechanic behavior of a Bosch mass production injector (standard injector) and validation against experiments has been performed. In order make the injector performing multiple injections, a deep investigation has been numerically carried out. The numerical study highlighted different area where injector may be improved with particular emphasis on electronic driving circuit. A new driving circuit concept, previously developed, has been successfully simulated showing promising fast-response capability for injector actuation.

The effects of numerical methodology in defining the initial conditions and simulating the compression stroke in D.I. diesel engine CFD computations are studied. Lumped and pointwise approaches were adopted in assigning the initial conditions at IVC. The lumped approach was coupled with a two-dimensional calculation of the compression stroke. The pointwise methodology was based on the results of an unsteady calculation of the intake stroke performed by using the STAR-CD code in the realistic engine and port geometry. Full engine and 60 deg. sector meshes were used in the compression stroke calculations in order to check the accuracy of the commonly applied axi-symmetric fluid dynamics assumption. Analysis of the evolution of the main fluid dynamics parameters revealed that local conditions at the time of injection strongly depend on the numerical procedure adopted.

Diesel engine CFD simulation is challenged by the need to improve the accuracy in the spray modeling due to the strong influence played by spray dynamics on evaporation rate, flow field, combustion process and emissions. This paper aims to present a hybrid model able to describe both primary and secondary breakup of high-dense high-pressure sprays. According to this approach, the model proposed by Huh and Gosman is used to compute the atomization of the liquid jet (primary breakup) while a modified version of the TAB model of O'Rourke and Amsden is used for the secondary breakup. The atomization model considers the jet turbulence at the nozzle exit and the growth of unstable wave on the jet surface. In order to validate the hybrid model, a free non-evaporating high-pressure-driven spray at engine like conditions has been simulated. The accuracy of the breakup time evaluation has been improved by tuning the TAB constant Ck according to the Pilch's experimental correlations.

This paper presents a numerical study of the combustion chamber design influence on the performance of racing engines. The analysis has been applied to the Ferrari 10 cylinder 3.0 liter S.I. engine adopted in Formula One racing. The numerical investigation aimed to asses the influence of stroke-to-bore ratio changes on engine performance within real life design constraints. The effects of the stroke-to-bore ratio on both the volumetric efficiency and the thermal conversion efficiency have been investigated. Flame front area maps, wall areas wetted by burned gases, mean flow field patterns and main turbulent parameters have been compared for two different S/B ratios. Since higher intake and exhaust valve areas per unit displaced volume result in a higher volume of piston bowls, a lower S/B ratio leads to a lower compression ratio, which strongly limits the indicated mean effective pressure.