Search Results

This is an optimization study on the use of filtered exhaust gas recirculation (EGR) to reduce the NO emissions of diesel engines. Control of the particulate emissions and provisions for filtered EGR were achieved by an Aerodynamically Regenerated Trap (ART) with collection efficiencies in the order of 99%. The amount of EGR was regulated to provide for substantial NO reduction, without unacceptably decreasing the thermal efficiency of the engine or increasing the CO emissions. EGR regulation was accomplished by monitoring the injection pump setting which was correlated to the fuel flow rate, the speed of the engine, the amount of EGR flow, and the ambient air temperature. Through these parameters, the mixture strength expressed as the equivalence ratio, ϕ, was calculated and related to the power output of the engine. Thus, a map of engine performance parameters was generated and related to measured NO and CO emissions.

The simultaneous control of diesel engine particulate and NOx emissions was targeted in this study. Particulate control was achieved with a trap that incorporated a high-filtration efficiency ceramic honeycomb monolith. Aerodynamic regeneration was used to periodically backflush the monolith filter. Soot was collected in a metallic chamber and was either incinerated by an electric burner or removed by a vacuum cleaner. NOx emissions were reduced by recirculation of filtered exhaust gases (EGR), which was made possible by the high collection efficiency of the employed monoliths. Tests were conducted on the road, driving a diesel vehicle under various loads and speeds. The levels of NO, CO and O2 at the exhaust were continuously monitored using a portable instrument. The particulate filtration efficiency was in the vicinity of 99% using CeraMem and 97-98% using Panasonic traps, respectively, hence the EGR line was effectively particulate-free.