Search Results

By upcoming new global two wheelers emission legislation, it is expected that it will become more and more challenging to control exhaust emissions. Therefore, not only optimized catalyst specifications to meet OBDII or RDE, but also new components will be required for future applications in two-wheeler exhaust systems. In such applications, beneath applying new components, it is necessary to ensure mountability while maintaining vehicle design but improving function of the exhaust system at the same time. As exhaust system layout of two wheelers is generally strongly limited by many factors, such as steeply bended exhaust pipes and catalysts which are hard to resize, one of the most challenging tasks is the positioning of sensor behind the catalyst, due to two wheelers unique exhaust design.

Affordable, efficient and durable catalytic converters for the two and three wheeler industry in developing countries are required to reduce vehicle emissions and to participate in a cleaner and healthier environment. As a contribution Continental Emitec started a comprehensive testing program with a state of the art 180 cc Bharat Stage (BS) III Indian motorcycle. The program consists of testing the state of the art of Metallic substrates with structured foils with various catalyst sizes and positions (original or close coupled). The publication presents a short literature survey and the results of the investigation with a big catalyst volume mounted in underfloor position as well as in close coupled position, gained over the World-wide harmonized Motorcycle Test Cycle, considering the two possible vehicle classifications of this motorcycle, Sub-Class 2.1 and Sub-Class 2.2.

Affordable, efficient and durable catalytic converters for the two and three wheeler industry in developing countries are required to reduce vehicle emissions and to maintain them at a low level; and therefore to participate in a cleaner and healthier environment. The LS-Design™(Longitudinal Structure) metallic substrates with LS foils have been proved to be capable of improving conversion behavior, even with smaller catalyst size. Specially this developed foil structure, which transforms a laminar exhaust gas flow into a turbulent one, significantly improves exhaust gas mixing behaviour in the catalyst. In this special period of time where BS4 applications will start appearing in the Indian market in the near future, this publication will deal with the experimental results achieved with different metallic substrate foil structures on one leading “state of the art” BS3 four stroke motorcycle technology, developed for the Indian market.

The Selective Catalytic Reduction (SCR) is the main after-treatment solution for high efficient diesel engines under development to cope with future lower fuel consumption and NOx emissions requirements (EU6+ legislation). Exhaust gas temperatures are decreasing too, leading to new after-treatment system developments in a close coupled position. Nevertheless before all vehicle architectures allow it, SCR systems are and will still be installed in underbody position. The current paper deals with an underbody metal SCR after-treatment systems, which is capable of active thermal management, and an ultra-compact SCR dosing system. These technologies are described and emission results obtained on several application examples (from passenger cars to light duty commercial vehicles) are presented and discussed in conjunction with an effective active thermal management of the SCR function.

Future emission legislation for 2 and 3 wheelers in EU and many other Countries will introduce durability of pollution control devices. Along with a durable coating technology, the mechanical durability of the substrate must be ensured to guarantee the requested conversion efficiency for the entire life of the motorcycle. A traditional approach consisting in engine bench and vehicle testing is no more competitive considering the very short time to market needed in the motorcycle market and the relevant cost related to this kind of tests. For this reason a new time and cost efficient accelerated component durability test was developed, which can account for the combined effects of critical load at a metallic catalytic converter. This paper shows the methodology used to determine the critical stressors and their levels in real operating conditions by measuring and analyzing a broad range of vehicle test information.

More efficient and durable catalytic converters for the two- and three-wheeler industry in developing countries are required at an affordable cost to reduce vehicle emissions, to maintain them at a low level and therefore to participate in a cleaner and healthier environment. This particularly is true nowadays, because the demand and prices of Platinum Group Metal (PGM) for catalyst are continuously increasing due to i) the worldwide progressive implementation of motorcycles emission legislations similar to Euro 3 Stage requiring catalysts, ii) the need for non-road diesel vehicles to be equipped now with catalyst systems, and iii) the constant increase of the worldwide automobile market. A new generation of metallic substrates with structured foils for catalytic converters is proven to be capable of improving conversion behavior, even with smaller catalyst size.

On one hand, latest worldwide emissions legislation developments aim to reduce NOx and Particulate Matter (PM) emissions of all diesel engines, while on the other hand lower fuel consumption diesel engines are still required for lower fleet average CO₂ emissions. As a consequence of the chosen CO₂ optimized combustion mode, the raw NOx emission increases and as such Selective Catalytic Reduction (SCR) technology will be the future choice for high efficiency NOx aftertreatment. This paper deals with SCR technology and its derivative SCRi® technology, when diesel particle reduction is required, especially for heavy-duty applications. Alongside the developed metal catalyst technologies, a complete SCR reducing agent dosing system is presented. Emission results gained with the SCR or SCRi® technologies on European commercial engines illustrate the potential of these technologies for conversion of NOx and PM emissions.

Future tighter emission limits for 2 wheelers in Europe and worldwide will require a completely new approach in catalyst system design. In particular, the EU5 scenario, probably with the same emission limits as 4 wheelers and, for the first time, emission durability requirements, needs a new strategy to combine higher and durable conversion efficiency with the classical characteristics of 2 wheeler systems: low cost, low weight with minimum impact on exhaust system layout and engine out performances such as low fuel consumption and good power output. This paper deals with the investigation of innovative metallic substrates keeping constant, as a first step towards the development of an EU5 system, both washcoat technology and PGM loading. In particular the effect of turbulent structures in the substrate, using PE (Perforated Foils) and LS (Longitudinal Structure) have been thoroughly investigated in testing 400cpsi PE and LS substrates.

Affordable, efficient and durable catalytic converters for the two and three wheeler industry in developing countries like India are required to reduce vehicle emissions and to maintain them at a low level and therefore to participate in a cleaner and healthier environment. A new generation of metallic substrates with structured foils for catalytic converters has been proven capable of improving conversion behavior even with smaller catalyst size. Specially developed foil structures which transform a laminar exhaust gas flow into a turbulent one, which significantly improve exhaust gas mixing behavior in the catalyst. This publication will deal with the analysis of different metallic substrate foil structures for the catalyst conversion performance for the leading “state of the art” four stroke 150 cm3 motorcycle technology developed for the Asian market.

Future emission legislation and new diesel engine technology tighten the requirements for modern diesel vehicle exhaust after-treatment systems. In particular, the oxidation catalyst system requires more efficiency to treat increasing raw emissions of HC and CO at low exhaust gas temperatures resulting from advanced combustion processes. This represents a big challenge for all developers today where the cost of raw materials continues to rise. Splitting the oxidation catalyst volume into two parts and mounting a very small part in front of a turbocharger on Euro III or Euro IV Diesel engines has been proved very efficient: Light off and maximum pollutant conversion rates were improved. New results gained with Pre Turbocharger Catalyst (PTC) on a Euro V type diesel engine are confirming previous observations. The complete after-treatment system of today's vehicles should be designed and developed for the whole life of the vehicle.

The new generation of metallic substrates for catalytic converters used in the two and three wheeler industry is capable of improving conversion behavior even with smaller catalyst size. The lowering of production costs due to less use of precious metal is possible. This novel technological application in motorcycle vehicle class improves exhaust emission performance and introduces a new competitive product on the market. Specially developed foil structures, which transform a laminar exhaust gas flow to a turbulent one, significantly improve exhaust gas mixing behavior in the catalyst. This publication is dealing with the analysis of different metallic substrate foil structures for the catalyst conversion performance and the light-off characteristics for the leading state of the art four stroke 150 cm3 motorcycle technology developed for the Asian market.

Further tightened emission legislation and new engine technologies increase the requirements for the exhaust after-treatment system of modern diesel passenger cars. Especially the increasing raw emissions of HC and CO as well as the low temperature of the exhaust gas for a long period during cold start of the New European Driving Cycle (NEDC) require additional efforts in the design of the oxidation catalyst system [1]. A highly efficient micro catalyst, which is mounted in front of a turbocharger, can help to treat efficiently these high HC and CO emissions. Due to the higher temperature level in front of the turbine and the significantly increased mass and heat transfer by turbulent flow, efficiency especially during cold start is highly increased. However the packaging constraints are more critical in this area due to heat considerations and also to maintain engine performance.