Search Results

A significant share of the emissions of a vehicle with internal combustion engine originates from the cold start. In addition to the more stringent limits for particulate emissions due the introduction of the Euro 6c standard for gasoline engines with direct injection (GDI), exhaust gas emission testing is currently performed applying the real driving emission test procedure (RDE) required by the Euro 6d TEMP standard. The RDE test procedure is not clearly defined, potentially allowing high loads immediately after the engine start. Under such circumstances the combustion chamber features low surface temperatures impairing emission performance and in particular provoking the excessive generation of hydrocarbon and particulate emissions. It is therefore important not only to examine the heating of the catalytic converter during the cold start, but also the preconditioning of the combustion chamber itself.

Small gasoline engines are used in motorcycles and handheld machinery, because of their high power density, low cost and compact design. The reduction of hydrocarbon emissions and fuel consumption is an important factor regarding the upcoming emission standards and operational expenses. The scavenging process of the two-stroke engine causes scavenging losses [1]. A reduction in hydrocarbon emissions due to scavenging losses can be achieved through a better understanding of the inner mixture formation. The time frame for fuel vaporization is limited using two-stroke SI engines by the high number of revolutions. With crank angle resolved optical methods it is possible to analyze the mixture formation behavior and combustion. A topic of these investigations is the use of alternative fuels such as alcohol- or butanol-blends and the analysis of their impact on the engine behavior.