Search Results

Head neck responses from volunteer experiments, as obtained in various loading directions by the Naval Biodynamics Laboratory, represent a unique set of data in the field of biomechanical research. From this a set of volunteer thoracic (T1) and head responses were selected as a reference for this study. Two loading conditions were considered i.e. frontal and lateral directions. The objective of this study is to develop a finite element model of the human neck in frontal and lateral directions. The number of elements in the model was kept low in order to reduce the processing time for simulation and to minimize damping problems. The structure of the model is as follows: the vertebrae and the head were considered as rigid bodies. The interface between vertebrae such as discs and different ligaments are modelled by brick and spring elements. The passive action of the muscles are taken into account when determining the stiffness characteristics of the ligaments.

In frontal impact, the occupantlbelt interaction is essential to obtain a good simulation of the occupant dynamic behaviour. Nevertheless, current mathematical models do not allow a realistic representation of this interaction to be obtained. Especially they are not adapted to simulate two important phenomena: the chest and pelvis deformation under the belt loading, and the belt sliding on the occupant. This paper deals with a tridimensional finite element model which allows an improved simulation of this interaction. The Hybrid III dummy, restrained by a 3-point retractor belt, was aimed, with a finite element program (RADIOSS). The model consisted of two parts: a deformable part representing, by means of springs and shell elements, the belt system, the thorax and the- pelvis; a rigid part representing, with rigid shell elements, the other components of the system. The belt was simulated by shell elements with a elasto-plastic material law.

A 50th percentile male pelvis finite element model was designed for impact simulation. Shell elements represented the pelvic bone, which geometry was taken into account. Non linear viscous springs accounted for soft tissues connecting skin to bone structure, and body segments inertia around the pelvis were represented using rigid bodies. Geometric and mechanical characteristics were taken either from litterature or by identification to in house experimental results. Three dimensional movements were reproduced by the model for static lateral loading and dynamic lateral impact simulation at two different velocities, 3.5 and 6.5 m/s, with a good agreement with experimental results. This model takes into account pelvic bone geometry, allowing an appreciation of its deformation and therefore injury risk.

Finite Element Models of the head are more and more often used to analyse brain injury risk during car crashes. Nevertheless, if the properties of head components such as brain, cerebral spinal fluid and membranes can be evaluated, the behaviour of the head has not yet been sufficiently validated as a whole. This paper deals with the development process of the model and the biomechanical data specifically generated for this purpose. Cadavers were re-pressurized and fully instrumented in order to measure 3D head dynamic, CSF pressure in various points of the subarachnoϊd space or in ventricles and intracerebral accelerations. For this last, a specific protocol has been developed; accelerometers have been designed to implant them at the right places. Tests were performed in various impact situations involving thorax and head segments with or without paddings.