Search Results

Computational analysis of occupant safety has become an efficient tool to reduce the development time for a new product. Multi-body computer models (e.g. Madymo models) that simulate vehicle interior, restraint system and occupants in various crash modes have been widely used in the occupant safety area. To ensure public safety, many injury numbers, such as head injury criteria, chest acceleration, chest deflection, femur loads, neck load, and neck moment, are monitored. Deterministic optimization methods have been employed to meet various safety requirements. However, with the further emphasis on product quality and consistency of product performance, variations in modeling, simulation, and manufacturing, need to be considered.

The SAE Large Male and Small Female Dummy Task Group has recommended a change to the Hybrid III dummy hip joint. This change was made because of a non-biofidelic interference in the current design that can influence chest accelerations. The modifications include a new femur casting shaft design and the addition of an elastomeric stop to the top of the casting. Static testing and Hyge sled tests were done to evaluate the modifications. Based on the results, the new design satisfied the requirements set by the SAE task group and reduced the influence of hip joint characteristics on chest accelerations.

The design of the Hybrid III dummy's hip joint limits the allowable relative rotation between the dummy's lower torso and femur assembly. This limited motion is thought to cause abnormally high chest accelerations in some front barrier crash tests. This paper describes static testing and computer modeling to quantify the hip joint range of motion and its effect on dummy chest accelerations. To verify model results, a series of HYGE sled tests were completed using modified hip joints.

Numerical simulation techniques are commonly used to assess the crash performance of automobiles and guide their design during the development stage. Mathematical models of vehicle structures, restraint systems and dummies are developed and verified under different test conditions to ensure an effective usage during their application in the study of a crash situation. This paper describes the development and validation of a finite element model of the US Department of Transportation (DOT) side impact dummy (SID). The geometry of the dummy parts is represented by shell and solid elements created from a digital scan of the dummy and the material properties are derived from quasi-static tests of each component. Springs and rigid bodies are added to represent the shock absorber and certain rigid parts such as the femur and ilium. The model verification is carried out by subjecting the dummy to twenty four impact conditions and comparing the simulations to test results.