Search Results

Interplanetary manned missions will change significantly the requirements imposed upon Life Support Systems (LSS) and specifically the requirements on LSS Automated Control Systems (ACS). During interplanetary manned missions the possibilities to control the operation of a specific system from the Ground Mission Control Center (GMCC) are diminished considerably. Therefore, this demands survivability and intelligent level enhancement LSS ACS.

Based on experience obtained in operation of the water and oxygen recovery systems installed onboard the Russian space stations Salut, Mir and the International Space Station ISS, data on the water and oxygen balance for a space station are presented as well as operational parameters and performance data of the systems. Using the data obtained design analysis of an integrated life support system for water and oxygen recovery based on physical/chemical means to be installed on a promising space station is carried out. Mandatory verification tests of new process (technologies) and recovery systems are to be conducted on ISS.

The Electron-VM Oxygen Generation System (OGS) is a main source of oxygen for crew breathing on the International Space Station (ISS) and the result of updating the Electron-V OGS that has been in successful operation for 17 years on Mir Space Station. The successful accomplishment of a manned flight program primarily has resulted in the stable operation of the system. The paper deals with analysis of off-normal situations related to the operation of the Electron-VM on board ISS. The system switching-off analysis based on the telemetry information processing and the results of the additional tests conducted under flight and ground conditions is performed. A principal cause of system switching-offs is a reduction in the pressure built by the circulating pumps due to ingress of gas bubbles into the suction pipeline. The results of the Electron-VM OGS switching-off analysis and the practical recommendations regarding its prevention are reviewed.

This paper deals with the development of the Trace Contaminant Dynamics Simulation Model (TCDSM) intended for the design concept of Trace Contaminants Removal System (TCRS) in development of a Space Vehicle Manned Pressurized Module (PM). The formalized description of the TCDSM includes the nonlinear equations of mass balance for the specific contaminants and the formalized descriptions of the contaminants sources and sinks. The crew and the PM non-metallic structural materials are main sources of contaminants. The air environments of the docking resupply (RSV) and crew-carrying space vehicles (CCSV) are the additional sources and sinks of the contaminants. The formalized description of the TCRS as the main sink of the contaminants takes into account the specific contaminants removal features based on the distribution factors defining its adsorptive capacity.

The Regenerative Atmosphere Revitalization and Monitoring system (ARMS), been part of Integrated Life Support System (ILSS), is intended for maintenance in the manned modules of a necessary chemical composition of an artificial gas atmosphere (AGA) on base of the crew metabolism product transform to environment initial components. Generally, the ARMS structure includes the individual systems and units intended for: → oxygen generation; → carbon dioxide removal and it concentration; → trace contaminants removal; → carbon dioxide reduction with the goal to produce an additional quantity of water necessary to increase the degree of the oxygen loop clousure. The ARMS structure of the International Space Station (ISS) Russian Segment (RS) includes the Electron-VM Oxygen Generation System (OGS), Vozdukh Carbon Dioxide Removal System (CDRS) and SBMP Trace Contaminants Removal Means (TCRM) installed in the Service Module.

The design of any complex system, especially eco-technical is very challenging due to the variety of processes, system composition, relation between different components and presence of the human. Process and technology selections affect the flow rate, composition, and phase of all resulting components. Therefore, evaluating alternative processes and/or technologies used often requires one to compare the relative environmental merits of distinctly different residual streams. Traditional thermodynamic analysis based on the first law of thermodynamics describes the conservation of energy. In this type of analysis all forms of energy are considered to be equivalent. The loss of quality of energy is not taken into account. It shows the energy flow to be continuous and energy balance is always closed. There can never be an energy loss, only energy transfer to the environment in which case it is useless.

This paper describes the concept of Ecotechnical System (ETS) based on the analysis of mass, power and data flow exchange within a biocenosis and between a biocenosis and technical systems that support life and activity of any biological entity in isolated environment of space vehicle. A biocenosis is considered to be a gathering of live organisms (generally people, animals, plants and micro-organisms) in an artificial habitat of the isolated environment. An Ecotechnical System is defined and it is shown that the given concept brings together different life support systems based on physical-chemical and biological means of regeneration of crew metabolic products. The existing limitations to the ETS development are reviewed in the paper in respect to limited volumes of space vehicles based on the vehicle characteristics and particular space program tasks. Three step analysis approach proposed for ETS effectiveness evaluation.

This paper reviews the preliminary definition of integrated life support system configurations based on a single criterion decision-making task (SCDMT). Comparative analysis results are shown for currently used effectiveness models based on SCDMT. Possible areas of application for those models are determined. It is also proven that well-known effectiveness model, which uses an equivalent mass approach to determine system expenditures, can be used only in cases where useful effect from system operation is the same. The article proposes the use of a global thermodynamic effectiveness criterion based on the exergy method to account for ECLSS functional expenditures, i.e. functional costs. Exergy is a concept that fuses energy and material quality information in a measure that is both descriptive and physically significant. This method accounts for nonequivalence of different forms of energy and allows measuring technological flows in the system using same measuring units.

The research conducted at NIICHIMMASH for the past several years in the area of Integrated Life Support System (ILSS) strategy development for technology efficiency analysis and system structure synthesis is reviewed in this paper. This study proposes an generalized efficiency model for ILSS development, which includes global, thermodynamic and local quantitative and qualitative factors. The research resulted in a strategy for the synthesis of ILSS structure based on evolutionary and integral- hypothhetical approaches. This strategy allows development of new system configurations, evaluation of existing ILSS effectiveness and considers decision marker's (DM) preferences. Uncertainty in the initial information about properties of the system or technology has a big influence on DM making decisions about future system appearance. Fuzzy set theory is used to define the uncertainty in the initial information.

This paper reviews Air Revitalization System (ARS) for Russian Segment of International Space Station software simulation development and implementation by the example the Service Module (SM) ARS. This simulation is designed for the ARS ground test functional analysis and in-flight support Individual ARS complex systems formal description is based on each system description as a unit, using information received from experiments and detailed simulations. Failure can be introduced for contingency simulation.

This paper reviews a Crew Simulation Model (CSM) for Space Vehicle Integrative Life Support System (ILSS) operation study. It is designed to simulate crew metabolic reaction mass and energy flows in accelerated time mode with each crew member specifics consideration. This CSM formally is based on human body general simulation, which includes main functional systems like: the cardiac-vascular, external respiration, thermal regulation and water/mineral balance. Work and rest time schedules are also considered as well as each crew member presence in a particular module. The CSM considers trace contaminants in metabolic products due to nutrition and environment temperature. This simulations' formal review is shown in the paper as well as formal implementation with computed experiment results. Some of the possible applications are also approached.

This paper deals with a man-made Gas Atmosphere (MMGA) Simulation Model developed and software presented for the Russian Segment of the International Space Station (ISS). The simulation Model (SM) is intended for analysis of the MMGA parameter nonstationary values in isothermal and non-isothermal conditions under a variable number of crew taking into account the intensities of the crew activity. The person's structure of the SM, basic assumptions, taken for modeling and formalized descriptions of SM separate modules. Formalized descriptions by the Segment's Pressurized Modules are based on using the nonlinear equations of mass/energy balance for the controlling volume, taking into account all main sources and sinks of the environment separate components, which are a crew, Integrated Regenerative Life Support System (IRLSS) separate subsystems, ISS on-board systems.

This paper considers one of the possible approaches to the synthesis of technologies for developing future Integrated Regenerative Life Support Systems (IRLSS) for space vehicle crews. The solution of technology synthesis task involves the following phases: (a) the efficiency model structuring for technical decision making process; (b) presentation of a discrete set of alternative technologies and their formal description; (c) the decision making task introduction. Modified efficiency model under consideration is based on use of local efficiency criteria set, reflecting designed system and its subsystems properties, space vehicle properties for which this system is intended. For the local criteria after verification of the independence terms quantitative and qualitative efficiency factors are applied. The qualitative efficiency factors were evaluated on the scale of order. The consideration of uncertainty in criteria values is based on a fuzzy set theory.

The paper is devoted to consideration of the possible approach to forecasting functioning physico/chemical Regenerative Life Support Systems (RLSS) in regular and off-normal conditions of operation on the basis of methods of mathematical simulation. Prediction of RLSS functioning under operating conditions represents the special interest for the analysis of off-normal situations, caused by development of a resource or presence that or that or of the other of failure of the equipment, or change of external conditions. In the given situations working mechanisms of transfer of mass and energy change not only characteristic and modes of operations of separate apparatus, but also, in a number of cases. The given peculiarities should be taken into account at formation of the formalized descriptions of the RLSS hardware.