Search Results

The new Beijing Automotive Industry Corporation (BAIC) engine, an evolution of the 2.3L 4-cylinder turbocharged gasoline engine from Saab, was designed, built, and tested with close collaboration between BAIC Motor Powertrain Co., Ltd. and Southwest Research Institute (SwRI®). The upgraded engine was intended to achieve low fuel consumption and a good balance of high performance and compliance with Euro 6 emissions regulations. Low fuel consumption was achieved primarily through utilizing cooled low pressure loop exhaust gas recirculation (LPL-EGR) and dual independent cam phasers. Cooled LPL-EGR helped suppress engine knock and consequently allowed for increased compression ratio and improved thermal efficiency of the new engine. Dual independent cam phasers reduced engine pumping losses and helped increase low-speed torque. Additionally, the intake and exhaust systems were improved along with optimization of the combustion chamber design.

In this paper, a recently improved Computational Fluid Dynamics (CFD) methodology for virtual prototyping of the heat treatment of cast aluminum parts, above most of cylinder heads of internal combustion engines (ICE), is presented. The comparison between measurement data and numerical results has been carried out to simulate the real time immersion quenching cooling process of realistic cylinder head structure using the commercial CFD code AVL FIRE®. The Eulerian multi-fluid modeling approach is used to handle the boiling flow and the heat transfer between the heated structure and the sub-cooled liquid. While for the fluid region governing equations are solved for each phase separately, only the energy equation is solved in the solid region. Heat transfer coefficients depend on the boiling regimes which are separated by the Leidenfrost temperature.

This paper outlines an improved computational methodology to simulate the immersion quenching heat transfer characteristics. Main applicability of the presented method lays in virtual experimental investigation of the heat treatment of cast aluminum parts, above all cylinder heads of internal combustion engines. The boiling phase change process between the heated part and a sub-cooled liquid domain is handled by using the Eulerian multi-fluid modeling approach, which is implemented within the commercial Computational Fluid Dynamics (CFD) code AVL FIRE®. Solid and liquid domains are treated simultaneously. While for the fluid domain mass, momentum and energy equations are solved in the context of multi-fluid modeling approach, only the energy equation is solved to predict the thermal field in the solid region. For the presented quenching simulation, the solid and fluid parts are contained in a single domain.