Search Results

Five different diesel fuel feedstocks were processed to two levels of aromatic (0.05 sulfur, and then 10 percent) content. These materials were distilled into 6 to 8 narrow boiling range fractions that were each characterized in terms of the properties and composition. The fractions were also tested at five different speed load conditions in a single cylinder engine where high speed combustion data and emissions measurements were obtained. Linear regression analysis was used to develop relationships between the properties and composition, and the combustion and emissions characteristics as determined in the engine. The results are presented in the form of the regression equations and discussed in terms of the relative importance of the various properties in controlling the combustion and emissions characteristics. The results of these analysis confirm the importance of aromatic content on the cetane number, the smoke and the NOx emissions.

Natural gas vehicle (NGV) fuel energy storage density is a key issue, particularly in many heavy-duty applications where compressed natural gas may have unattractively low energy density. For these uses, benefits can be derived by using liquefied natural gas (LNG). From a market perspective, LNG can play a role for transportation because it is available in various areas of the United States and throughout the world. This paper provides a general overview of LNG use for vehicles and specifically an analysis of factors governing the behavior of this cryogenic fluid in a confined vessel. This is intended to provide an understanding of the cause/effect relation between LNG fuel composition, tank heat influx, and rate of fuel usage or storage time.

The purpose of this work was to develop a series of octane reference fuels for road testing methanol fueled vehicles. Preliminary attempts to measure the research octane number of neat methanol by the standard ASTM test procedure produced anomalous results. This led to a more basic method of measuring the octane number based on the incipient knock compression ratio. The incipient knock method gave research and motor octane numbers of 112 and 88, respectively, for neat methanol. Research octane numbers of several methanol reference fuel blends prepared by adding octane enhancers and depressors were determined. The effects of spark timing and air/fuel mixture temperature on the incipient knock compression ratio of neat methanol were also examined.