Search Results

This study examined the evolution of the surface topography of imperfections in response to painting. Critically-sized imperfections on industrially produced coated sheet steel surfaces were sampled, and carefully characterized. Changes in the surface topography were measured after painting simulations, and visibility after painting was assessed. Three-dimensional optical profilometry was demonstrated to be a powerful technique for assessing imperfection topographies and their evolution during painting; several imperfections that were completely invisible through human inspection after painting were still measurable by 3-D topography. Two primer surfacer systems were used, to compare a conventional liquid system with a high-build anti-chip powder system.

The quasi-static denting behavior of sheet steels has been analyzed in a systematic FEA study, which considers material properties, panel radius, sheet thickness, panel length and boundary conditions. Results from a full factorial experimental matrix have been analyzed statistically to identify those variables and variable interactions that influence dent performance. The primary factors which control dent performance are material properties, panel radius and sheet thickness, while panel length and boundary conditions are not significant. Based on the results of this study, two commonly used dent criteria (loading energy and visible dent load) are analyzed, and previously reported opposite effects of radius of curvature on dent performance are clarified.

Three heats of 0.40% carbon microalloyed steel, containing either 0.03 % or 0.10% sulfur, and with and without a 0.09% vanadium addition, were subjected to metallographic analysis and mechanical property testing. Bars were heated to austenitizing temperatures, between 1000°C and 1300°C. Significant amounts of intragranular ferrite, which has been associated with improved toughness, formed only in specimens containing vanadium and high sulfur which were austenitized above 1100°C. The balance of the microstructure consisted of ferrite which formed at prior austenite grain boundaries and large amounts of pearlite. High densities of manganese sulfide particles in the steels with high sulfur content effectively retarded austenite grain growth. The formation of significant amounts of intragranular ferrite decreased mean free ferrite spacing, effectively refined the pearlite structure, and lowered the Charpy V-notch impact transition temperature.

This paper reviews the bending fatigue endurance limits reported in the literature for carburized steels. Almost an order of magnitude difference in fatigue limits (210-1950 MPa) is reported. The reasons for this wide range are not clear because of the complexity of interactions between the microstructural, testing and manufacturing systems associated with carburized components. In well characterized specimens, two types of microstructures and fatigue crack mechanisms associated with moderate and high levels of fatigue performance have been identified and are described here. Finally, the effects of selected engineering parameters on the measurement of bending fatigue limits are discussed. The need for more complete experimental characterization of fatigue performance is stressed as a critical step to produce consistent bending fatigue performance at the upper end of that attainable in carburized steels.