Search Results

This paper described implementation of a selectable one-way clutch in the GM's RWD 6-speed automatic transmission [1] content to replace the current one-way clutch and low/reverse plate clutch. A selectable one-way clutch can hold torque or freewheel in one or both directions depending on the desired operating mode. In this project, it is used as the reaction element to hold torque selectively in 1st gear and reverse. This paper describes hardware design, vehicle implementation, and control of the selectable one-way clutch. In additions, lower parasitic losses due to low/reverse clutch removal is measured and compared with production 6-speed RWD automatic transmissions. Other issues such as durability, cost, packaging, and mass are also addressed. This idea is demonstrated in a 6-speed RWD SUV. Vehicle results show very good static and rolling garage shifts as well as 1-2 upshifts, and 2-1 powered and coast downshifts.

In automatic transmissions, an open torque converter transmits torque from the engine to the transmission using fluid coupling. Although torque converters are ideal launch devices for automatic transmissions, they are inefficient in steady-state operations. An electronically controlled capacity clutch (ECCC) is implemented to control the slip between the pump and turbine of the torque converter, thereby increasing its energy transfer efficiency and increasing vehicle fuel economy. Even though reducing torque converter slip minimizes losses due to fluid coupling, it also decreases the damping provided by a slipping torque converter and as a result increases the sensitivity of the driveline to engine excitations. This investigation uses driveline torsional velocity response measurements to evaluate the effects of using slip feedback closed-loop control with a very aggressive torque converter ECCC slip schedule in automatic transmissions.

Friction Launch transmissions use a wet multi-plate clutch to replace the torque converter in an automatic transmission. By using one of the range clutches inside the transmission, the benefits of this integrated friction launch technology (IFL), such as reduction in mass, packaging, and cost, can be enhanced. The availability of new automatic transmissions with higher number of speeds and wider ratio spreads makes IFL technology more viable than ever before. The new GM Rear-Wheel-Drive (RWD) six-speed transmission has paved the way for a full implementation of integrated friction launch technology in a GM full size Sport-Utility Vehicle (SUV). This project focuses on both hardware and control issues with the friction launch clutch. The hardware issues include designing the clutch for launch energy, cooling, and durability.