Search Results

The automotive use of cast aluminum has greatly increased during the past decade, especially for engine blocks and cylinder heads. One physical property that is important in elevated-temperature applications is long-term dimensional stability of the cast aluminum component. Certain cast aluminum alloys (like 319) can undergo dimensional changes when exposed to engine operating temperatures over long periods of time; when these changes occur, the shape of the casting is distorted and the performance of the component may be diminished. Thus, a study was conducted to measure dimensional growth changes in a cast 319-type aluminum alloy as a function of heat-treatment, exposure temperature, and exposure time at the given temperature. The results show that all three factors have a significant effect upon the dimensional stability.

Compositional and microstructural variations in a casting can often result in rather significant variations in the response to a given aging treatment, leading to location dependent mechanical properties. The objective of this study is to determine the effect of copper content and solidification rate on the aging behavior of a type 319 cast aluminum alloy. The nominal composition of the alloy is Al-7% Si-3.5% Cu-0.25% Mg, however, typical secondary 319 aluminum specifications allow copper levels to vary from 3-4%. Solidification rates throughout a casting can vary greatly due to, among other factors, differences in section size. To determine the effect of copper level and solidification rate on the aging response, aging curves were experimentally developed for this alloy. Three different copper levels (3, 3.5, 4%) and two solidification rates were used for this study. Aging temperatures ranged from 150-290°C with nine aging times at each temperature.