Refine Your Search

Search Results

Author:
Viewing 1 to 3 of 3
Technical Paper

Quantitative Imaging of In-Cylinder Processes by Multispectral Methods

1997-02-24
970872
With the objective of achieving better investigation of engines-fuels by obtaining instantaneous quantitative imaging of in-cylinder processes, several steps have been taken for some years at Rutgers University. They are: (1) Construction of a new multispectral high-speed infrared (IR) digital imaging system; (2) Development of spectrometric analysis methods; (3) Application of the above to real-world in-cylinder engine environments and simple flames. This paper reports some of results from these studies. The one-of-a-kind Rutgers IR imaging system was developed in order to simultaneously capture four geometrically (pixel-to-pixel) identical images in respective spectral bands of IR radiation issued from a combustion chamber at successive instants of time and high frame rates.
Technical Paper

Flames and Liquid Fuel in an SI Engine Cylinder During Cold Start

1996-05-01
961153
The flame propagations in the very first firing and subsequent cycles in an SI engine during cold start were studied to gain a better understanding of reaction fronts associated with liquid fuel (regular unleaded) in the cylinder. This work was performed using the Rutgers high-speed spectral infrared digital imaging system on a single-cylinder engine with optical access. The engine was mounted with a production engine cylinder-head mated with a conventional port fuel injection (PFI) system. In the study, four images in respective spectral bands were simultaneously obtained at successive instants of time during the combustion period, which was done for eight sequential cycles. This multiple-band successive-imaging was repeated in intervals of about two minutes over a period of more than twenty-five minutes after the engine start. During this experiment, the temperature changes at the intake port, the water jacket and the exhaust gas were monitored.
Technical Paper

Post-Flame Oxidation and Unburned Hydrocarbon in a Spark-Ignition Engine

1995-10-01
952543
Many recent publications indicate that spark ignition (SI) engines equipped with the conventional port-injection fuel system (PIF) seem to have serious fuel-maldistribution problems, including the formation of liquid layers over the combustion chamber surfaces. It is reasonable to expect that such a maldistribution is an unfavorable condition for the flame propagation in the cylinder. The in-cylinder flame behaviors of a PIF-SI engine as fueled with gasoline are investigated by using the Rutgers high-speed spectral infrared imaging system. These results are then compared with those obtained from the same engine operated by gaseous fuels and other simple fuels. The results from the engine operated by gasoline reveal slowly burning fuel-rich local pockets under both fully warmed and room-temperature conditions. The local pockets seem to stem from the liquid layers formed over the surfaces during the intake period.
X