Search Results

This paper investigates the effects of driver airbag inflation characteristics, airbag relative position, airbag to dummy relative velocity, and steering column characteristics using a finite element model of a vehicle, air bag, and Hybrid III 50% male dummy. Simulation is conducted in a static test environment using a validated finite element model. Several static simulation tests are performed where the air bag module's position is mounted in a rigid steering wheel and the vertical and horizontal distances are varied relative to the dummy. Three vertical alignments are used: one position corresponds to the head centered on module, another position corresponds to the neck centered on module, and the third position centers the chest on the module. Horizontal alignments vary from 0 mm to 50 mm to 100 mm. All of these tests are simulated using a typical pre-1998 type inflation curve (mass flow rate of gas entering the bag).

While the present air bag systems have been shown to be highly effective in high severity crashes, undesirable side effects have been reported in some low severity events. The inflation rate of the airbag during deployment has been cited as a factor which induces injuries. A rapid airbag deployment rate is advantageous to provide protection to occupants in severe crashes. On the other hand, airbag aggressivity associated with the high inflation rate can increase injuries in the lower severity crashes. The injury producing forces from the airbag increase as the occupant position becomes closer to the bag at the time of deployment. This paper describes the results of an analytical study to evaluate chest injury measures for reduced inflation rates of a Taurus type air bag in a variety of crash modes. A detailed nonlinear finite element model of an unfolding airbag and a 50th percentile male Hybrid III dummy are used in conjunction with a test buck to simulate frontal crashes.