Search Results

This paper is a follow up to a study published in 2005 1 on the same topic and presents a study that was conducted to compare vehicle speed change and acceleration data from full-scale testing to results generated by computer simulation using the SImulation MOdel Non-linear (SIMON) vehicle dynamic simulation model version 3.1 within the Human Vehicle Environment (HVE) software version 5.2. SIMON will be referred to in this paper as the computer or simulation model, while HVE will be referred to as the computer software. In the previous study, a simple method to model the curb was developed and version 2.0 of the simulation model was validated, for delta-v, up to approximately 6.7 m/s (15 mph) and for vertical accelerations, up to speeds of approximately 4.5 m/s (10 mph).

This study was conducted to compare vehicle speed change and acceleration data from full scale testing to results generated by the Simulation Model Non-linear (SIMON) vehicle dynamic simulation model (version 2.0) within the Human Vehicle Environment (HVE) software. The study also sought to expand the body of existing curb impact tests and compare the present results to data from published literature. The results of the full scale testing of a 1996 Dodge Ram 1500 pickup are presented. Instrumented tests were performed at speeds up to approximately 6.7 m/s (15.0 mph) and at approach angles of 90° and 45°. SIMON was used to simulate the full scale testing conducted by the authors. The simulation results, including primarily vehicle speed change (delta-v), and accelerations are compared to the results of full scale testing. The appropriate method for modeling curb profile within SIMON version 2.0 was studied and is presented in this paper.

Low speed collinear collisions have received some attention in the past in published technical literature. Underrepresented are full-scale instrumented tests utilizing vehicles equipped with foam core bumpers and closing speeds greater than 2.2 meters per second (m/s). Systematic testing was designed to obtain data in collisions between vehicles with similar and mixed bumper structures. Testing was performed at closing speeds ranging from 0.8 to 5.4 m/s. Following each test, vehicle bumper and other damage was documented. Data from the 30 tests for each category of bumper and mixed categories were analyzed to identify the test speed, load magnitude, velocity change, duration of impact and coefficient of restitution. In addition, the energy absorption characteristics and damage thresholds of the various types of bumper systems were obtained.