Search Results

This article describes experimental research results of the inductive sensor of the electropneumatic clutch control system for the mechanical transmission. Inductive sensors are used to determine the position of the car body, the position of the controls and the position of the rod of the clutch control actuator. The design of the clutch pedal position sensor is proposed, which can be brought into line with the master cylinder to unify the clutch control systems. Complete unification of the automated electropneumatic clutch control system for trucks will allow creating modifications in which it is possible to completely abandon the use of brake fluid in the drive, which will improve the ergonomic and environmental performance of the vehicle. The advantages of such sensors are the ability to receive a signal in digital form without additional converters, the ability to work using only two wires, no contact between moving parts, resistance to aggressive environments and compact size.

In this paper the use of a combined electro mechanical drive for driving wheels of vehicles make it possible to realize potential of a stepless transmission. In this case, the use of various differential mechanisms that summarize the movement from the internal combustion engine (ICE) and the electric motor can reduce the unevenness in time of the traction force on the drive wheels. Improving energy efficiency of hybrid vehicles is also possible by ensuring the engine operation at a constant high-speed mode. In tis paper the results of evaluating the reduction of energy losses during acceleration of the vehicle and the engine at constant speed. The use of continuously variable transmission (variator, electric and electromechanical transmission) along with other advantages allows the engine to operate at a constant angular speed. In this case, when accelerating a car, energy is saved due to the absence of its costs for accelerating the rotating masses of the engine.

One of the reasons for the large number of road accidents on highways in Ukraine [1] is the instability of the braking properties due to the unstable characteristics of the brake mechanisms’ friction pairs. The manufacturer produces new automobiles with installed brake pairs (brake pads and their counter bodies), which have passed long-term tests for the stability of the friction coefficient and braking forces distribution of between the axles. This ensures the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance. During operation, instead of worn-out brake pads, brake discs and drums, drivers can purchase new ones, manufactured as spare parts. However, in the well-known literature there are no methods that allow to check the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance.

The article deals with the analysis of one of the methods of selecting rational parameters of automated clutch control system for robotic transmission. The objective is to select rational parameters of automated clutch control system for robotic transmission, equipped with electropneumatic actuating mechanism on the basis of mathematical simulation. The depicted mathematical simulation of the clutch control system is characterized by the possibility to coordinate the algorithm of control unit with the dynamic processes in the execution device. The new functional interrelations between the elements of the electro-pneumatic actuator are mathematically described. The way to the selection of rational parameters of an automated control system for clutch is recommended; the selection taking into account the features of the electro-pneumatic actuator. Using the mathematical modeling method, rational control parameters of the automated clutch control system are determined.

New solutions for actual problems of determination the efficient distribution of braking forces between the axles of the vehicle, and the stability and drivability of two-axles vehicles at service braking are received in the thesis. It permitted for the first time to determine the Law of distribution of the braking forces between the axles, that ensuring straight-running stability of two-axle vehicle at service braking, to obtain the ideal characteristics for the braking system of two-axle vehicle at service braking and to determine possible values for the distribution of braking force on the front axle. The drivability criterion at service braking obtained further development; it is offered to use boundary at gripping front or rear wheels angular vehicle acceleration on the road.

This article describes experimental research results of the electropneumatic clutch control device for the mechanical transmission. The aim is to assess electropneumatic clutch control device characteristics to regulate both mechanical and robotic transmission. The feature of the clutch control system having the electropneumatic actuator on the basis of a power cylinder is the use of a control module that consists of an acceleration valve and two electropneumatic valves. A new structural relationship between the electropneumatic clutch control device elements on the basis of the new acceleration valve design is suggested. The assessment of mass and dimension parameters of well-known devices and this electropneumatic clutch control device is provided. A new approach to choose automated clutch control system parameters taking into account the relay electropneumatic control system operation features is suggested.