A Comparative Study on the Performance of the Flat versus Corrugated Flame Arrester’s Effect used in Explosion Proof Diesel Engine
Abstract As the explosion proof diesel engine (EPD) of underground trackless tyred vehicle dynamic mechanical device, due to its good dynamic and economic performance, the diesel has been widely applied. The flame arrester can prevent the exhaust system from tempering, but the increased resistance will seriously affect the performance of diesel. Through the comparison of the CFD-FLUENT fluid simulation on flow and pressure field, the results show that the corrugated flame arrester performs better on reducing the exhaust back pressure than flat flame arrester and ensures the explosion-proof effect. The bench test of explosion proof diesel engine on intake and exhaust system is conducted, analysing the effect of the exhaust resistance under different speeds of diesel engine on the power, economy and emission of TY4100QFB type diesel engines with equivalent flow area , different specifications of flat versus corrugated flame-arrester in the course of external characteristics.
Influence of the Methanol Proportion on the Combustion Characteristics of Methanol-Biodiesel -F-T Diesel Blended Fuel
Abstract The F-T diesel made from coal by Fischer-Tropsch synthesis (F-T) can be used as a clean alternative fuel of diesel engine. To alleviate the drawback of high cost and low viscosity of F-T diesel, the Methanol-Biodiesel -F-T diesel multiple fuel (MBFT) was prepared by adding low-cost methanol and high-viscosity biodiesel as modifiers. Considering the immiscibility between alcohols and hydrocarbons, this paper carried out a series of stability tests and found that n-decanol was the optimum co-solvent of MBFT. The MBFTs blended by biodiesel with the volume fraction of 10% (10% vol.) and methanol with varying proportions of 0%, 5%, 10% and 15% vol. were denoted as M0, M5, M10 and M15, respectively. The increasing methanol proportion caused the increase of the oxygen content in the blended fuels and the reduction of heat value, surface tension and cetane number. The influence of methanol proportion on combustion characteristics of turbo-charging engine was studied.