Search Results

Practical evaluation and accurate prediction of edge cracking are challenging issues in stamping AHSS for automotive body structures. This paper introduces a new hole-expansion testing method that could be more relevant to the edge cracking problem observed in stamping AHSS. A new testing method adopted a large hole diameter of 75 mm compared to the ISO standard hole diameter of 10 mm. A larger hole diameter was determined to be sensitive to edge cracking using the finite element method (FEM) based sensitivity analyses with various hole sizes. A die punching tool was developed to replicate typical production blanking conditions. An inline monitoring system was developed to visually monitor the hole edge cracking during the test and synchronize with the load-displacement data. Two AHSS materials, DP980 and TRIP780, and an aluminum alloy, A1 5182-O, were experimentally evaluated.

The capabilities of the servo press for varying the ram speed during stroke and for adjusting the stroke length are well known. Various companies installed servo presses for blanking. Some of the considerations may include increase in productivity and flexibility in adjusting the ram stroke, noise reduction and improvement of edge quality of blanked edge. The objectives of this study are to determine the effect of ram (blanking) speed upon the edge quality, and the effect of multiple step blanking using several punch motions, during one blanking stroke.