Search Results

Automotive Rear Seats are designed as foldable seats to provide more luggage space to customers when the seat is unoccupied. Foldable seats are of two types, Free Standing Seats and High Latch Seats. Free standing seats are designed with recliner mechanism which allows the seat back to rotate and lock at any given position. High Latch Seats are designed with latches operated by CAMs & Springs which locks with striker wire mounted on the body or side pillars. Recliner Mechanism on free standing seat helps to rotate and lock the seat back at any position with ease. But high latch seats require higher efforts to push the seats towards the striker wire to lock. Efforts (Force in N) required to latch the seats with striker wire need to be in the operating range of customers to latch it easily. Hence latching effort calculations and study of design factors which influence the latching efforts get more importance to avoid any customer complaints at later stage.

Automotive Seat design is driven by various design factors considering occupant safety, occupant comfort, road visibility etc. Seats are generally a combination of structural frames, foams, suspension wires, adjustment mechanisms etc. to support safety, comfort & road visibility. Most of the regulatory tests on seats are related to safety which demands structural integrity of seat frames, welds and bolts etc. And few tests demand occupant comfort and seat functionality involving foams, suspension wires & adjustment mechanisms. There are few tests which needs design consideration on all seat components discussed above. FMVSS 202a Back Set Retention is one among them. It is a static test with multiple loads in sequence of loading and unloading steps on the seat back and head restraint. Stiffness of the foams, lumbar mats, seat adjustment mechanisms, seat frames contribute a lot to meet performance targets set by the regulation.

Latches are generally used to lock/unlock a component against each other. In the automotive industry, latches are widely used in doors and seats. Seat latches have to secure the seat safely to the body in the event of a crash and at the same time they have to be locked/unlocked with easy efforts. Seat latches are mostly supplier designed parts. Supplier latch effort calculations involve only latch components. Actual latch effort calculations should be done with seat structures, foams, trims and body environments. Hence OEMs are responsible to provide easily lockable/unlockable seats to their customers. Customers nowadays, are raising complaints regarding latching issues to respective automotive industry which in turn costs more due to after sales services/warranty claims. Therefore, automotive industries must spend a significant amount of time and capital on physical test and method development for calculating the latch efforts.

Automotive manufacturers around the world are pushing towards the goal of better safety from their vehicles without compromising on the fuel economy. One of the very successful efforts in this direction is the hot forming technique that has been around for 30 years since Saab used it for the first time in 1986. Finite element simulations for this technique are of paramount importance to identify and optimize the process; as the steels used in hot stamping are sensitive to certain variables when heated that would otherwise cause very few disturbances in a normal cold forming process. The major contributor to the high strength of the stamped part is the phase transformation that it undergoes during the hot forming process. This paper investigates and identifies critical parameters through Finite Element Analysis (FEA) simulations.

Automotive industries are emphasizing more and more on occupant safety these days, due to an increase in awareness and demand to achieve high safety standards. They are dependent on simulation tools to predict the performance of subsystems more accurately. The challenges being encountered are designs which are getting more complex and limitations in incorporating all real-life scenarios, such as to include all manufacturing considerations like forming and welding effects. Latest versions of solvers are slowly introducing new options to include these actual scenarios. Ls-Dyna is one of the explicit solvers to introduce these possibilities. The process of including stamping details into crash simulation is already being performed in the automotive industry. However, for seatbelt pull analysis, this has not been explored much.