Search Results

Designing a durability test for an automatic transmission that appropriately reflects customer usage during the lifetime of the vehicle is a formidable task; while the transmission and its components must survive severe usage, overdesigning components leads to unnecessary weight, increased fuel consumption and increased emissions. Damage to transmission components is a function of many parameters including customer driving habits and vehicle and transmission characteristics such as weight, powertrain calibration, and gear ratios. Additionally, in some cases durability tests are required to verify only a subset of the total parameter space, for example, verifying only component modifications. Lastly, the ideal durability test is designed to impose the worst case loading conditions for the maximum number of internal components, be as short as practicable to reduce testing time, with minimal variability between tests in order to optimize test equipment and personnel resources.

Government regulations for fuel economy and emission standards have driven the development of technologies that improve engine performance and efficiency. These technologies are enabled by an increased number of actuators and increasingly sophisticated control algorithms. As a consequence, engine control calibration time, which entails sweeping all actuators at each speed-load point to determine the actuator combination that meets constraints and delivers ideal performance, has increased significantly. In this work we present two adaptive optimization methods, both based on an indirect adaptive control framework, which improve calibration efficiency by searching for the optimal process inputs without visiting all input combinations explicitly. The difference between the methods is implementation of the algorithm in steady-state vs dynamic operating conditions.

Automotive cruise control systems are used to automatically maintain the speed of a vehicle at a desired speed set-point. It has been shown that fuel economy while in cruise control can be improved using advanced control methods. The objective of this paper is to validate an Adaptive Nonlinear Model Predictive Controller (ANLMPC) implemented in a vehicle equiped with standard production Powertrain Control Module (PCM). Application and analysis of Model Predictive Control utilizing road grade preview information has been reported by many authors, namely for commercial vehicles. The authors reported simulations and application of linear and nonlinear MPC based on models with fixed parameters, which may lead to inaccurate results in the real world driving conditions. The significant noise factors are namely vehicle mass, actual weather conditions, fuel type, etc.