Search Results

Diesel Exhaust Fluid (DEF) like Adblue® is a urea/water solution injected upstream from the SCR catalyst. Urea decomposes into ammonia (NH3) which acts as reducing agent in the de-NOx reaction process. However, incomplete decomposition of urea can lead to unwanted deposits formation, thereby resulting into backpressure increase, loss of NOx reduction efficiency, and durability issues. The phenomenon is aggravated at low temperatures and can lead to restriction or stop of DEF injection below certain exhaust temperatures. This paper focuses on the influence of the additivation of DEF on deposits formation in a passenger car close-coupled SCR on filter Diesel exhaust line installed in a laboratory flow bench test. The behavior of two different additivated DEF was compared to Adblue® in terms of deposits formation on the mixer and SCRF canning at different temperatures comprised between 240°C and 165°C, and different air flows.

Euro VI standards for heavy duty vehicles require the use of a DPF in order to comply with the particulate matter emission limit. Although passive regeneration of soot by NO2, promoted by a DOC located upstream the DPF, is preferred, the use of an active regeneration might be required whenever the soot mass trapped in the DPF increases. Some manufacturers made the choice of having a fuel injection in the exhaust system in order to generate an exothermic reaction in the DOC that helps to regenerate the particulate filter. This dedicated circuit avoids the use of in-cylinder post-injection which may induce oil dilution by diesel. The DPF regeneration is efficient and the DOC works durably if the exhaust diesel spray is completely vaporized before entering the DOC and is thoroughly mixed with the exhaust gases. However, ensuring complete evaporation and an optimum mixture distribution in the exhaust line is challenging.