Search Results

Streamwise vortices can be observed to interact in a number of real world scenarios. Vortex generators operating in boundary layers, as well as aircraft flying in formation can produce vortex interactions with multiple streamwise vortices in close proximity to each other. The tracking of these vortex paths as well as the location and nature of their breakdown is critical to determining how the structures can be used to aid flow control, and how large scale turbulence develops from them. Six configurations of two NACA0012 vanes were evaluated computationally to observe the interactions of a pre-existing vortex with a vortex generated downstream. Co and counter-rotating configurations at three different lateral spacings were used to vary vortex position and impingement on the rear vane.

When a vehicle travels through a corner it can experience a significant change in aerodynamic performance due to the curved path of its motion. The yaw angle of the flow will vary along its length and the relative velocity of the flow will increase with distance from the central axis of its rotation. Aerodynamic analysis of vehicles in the cornering condition is an important design parameter, particularly in motorsport. Most racing-cars are designed to produce downforce that will compromise straight-line speed to allow large gains to be made in the corners. Despite the cornering condition being important, aerodynamicists are restricted in their ability to replicate the condition experimentally. Whirling arms, rotary rigs, curved test sections and bent wind tunnel models are experimental techniques capable of replicating some aspects of the cornering condition, but are all compromised solutions.