Search Results

The noise treatments weight reduction strategy, which consists in combining broadband absorption and insulation acoustic properties in order to reduce the weight of barriers, depends strongly on surface to volume ratio of the absorbing layers in the reception cavity. Indeed, lightweight technologies like the now classical Absorber /Barrier /Absorber layup are extremely efficient behind the Instrument Panel of a vehicle, but most of the time disappointing when applied as floor insulator behind the carpet. This work aims at showing that a minimum of 20 mm equivalent “shoddy” standard cotton felt absorption is requested for a floor carpet insulator, in order to be able to reduce the weight of barriers. This means that a pure absorbing system that would destroy completely the insulation properties and slopes can only work, if the noise sources are extremely low in this specific area, which is seldom the case even at the rear footwells location.

The Flaxpreg is a green and light very long flax fibers thermoset reinforced sandwich, which can be effectively used as multi-position trunk loadfloor or structural floor in the passenger compartment of a vehicle. The prepreg FlaxTapes of about 120 g/m2 constituting the skins of the sandwich, are unidirectionally aligned flax fibers tapes, with acrylic resin here, easily manipulable without requiring any spinning or weaving step and thus without any negative out of plane crimping of the almost continuous flax fibers. Thanks to their very low 1.45 kg/dm3 density combined with an adaptive 0°/90°/0° orientation of the FlaxTapes (for each skin) depending on the loading boundary conditions, the resulting excellent mechanical properties allow a - 35% weight reduction compared to petro-sourced Glass mat/PUR sandwich solutions (like the Baypreg).