Search Results

In the face of the pressing climate crisis, a pivotal shift towards sustainability is imperative, particularly in the transportation sector, which contributed to nearly 22% of global Greenhouse Gas emissions in 2021. In this context, diversifying energy sources becomes paramount to prevent the collapse of sustainable infrastructure and harness the advantages of various technologies, such as Fuel Cell (FC) Hybrid Electric Vehicles. These vehicles feature powertrains comprising hydrogen FC stacks and battery packs, offering extended mileage, swift refueling times, and rapid dynamic responses. However, realizing these benefits hinges upon the adoption of a rigorously validated simulation platform capable of accurately forecasting vehicle performance across diverse design configurations and efficient Energy Management Strategies. Our study introduces a comprehensive microcar hybrid prototype model, encompassing all subsystems and auxiliaries.

Hydrogen technologies are among the main candidates to reduce carbon emissions in the automotive transport sector. Among the innovative solutions, Electric Vehicles (EVs) featuring hybrid powertrains, combining battery packs and hydrogen Fuel Cell (FC) stacks, are gaining prominence in our pursuit of sustainability objectives. Nonetheless, realizing the full potential of these hybrid vehicles hinges on the implementation of efficient Energy Management Strategies (EMS). In this study, we present an integrated EMS approach to achieve extended driving ranges and reduced energy consumption. This is achieved primarily by operating the FC within its high-efficiency range, while ensuring that the battery packs operate in a charge-sustaining mode. The EMS is crafted through an adaptive algorithm that takes into account various driving conditions to establish the most suitable sub-optimal control strategy.

Hydrogen technologies have been widely recognized as effective means to reduce Greenhouse Gases emissions, a crucial issue to target a Carbon-free world aimed by the European Green Deal. Within the road transport sector, electric vehicles with a hybrid powertrain, including battery packs and hydrogen Fuel Cells (FCs), are gaining importance owing to their adaptability to a wide variety of applications, high driving mileages and short refueling times. The control strategy is crucial to achieve a proper management of the energy flows, to maximize energy efficiency and maximize components durability and state of health. This work is focused on the design of an integrated Energy Management Strategy (EMS), whose aim is to minimize the hydrogen consumption, by operating the FC mainly in the high efficiency region while the battery pack works according to a charge sustaining mode. The proposed EMS is composed of a control algorithm and a supervisor.

According to European Union strategies, hydrogen technologies have a significant potential for the decarbonization of the automotive sector. Fuel Cells are considered a highly sustainable alternative to internal combustion engines for hybrid powertrain solutions. Since experimental tests on real prototypes are extremely costly in terms of time and resources, they represent a limit to the development rapidity of such complex vehicles. Consequently, simulation models are gaining further importance for their intrinsic time- and cost-saving characteristics, while their predictive capability is crucial. Accordingly, the development of the so-called “digital twins” able to accurately represent the real-time digital counterpart of a physical system has become an important research issue.

The international community is making significant efforts to face climate changes related to substantial greenhouse gas (GHG) emissions. Among all the sectors, transport is responsible for almost a quarter of global GHG emissions, 72% of which is imputable to road vehicles. It’s also expected that, without significant measures, these emissions may grow at a faster rate than other sectors. Furthermore, rising fuel costs and availability concerns have made the electrification of road transportation an attractive option to reduce oil dependency. However, this solution produces an electricity demand increase, causing significant overload conditions that could affect the reliability of the distribution sector.

Hydrogen plays a crucial role towards the decarbonization of the transport sector, whilst most of the challenges for a widespread diffusion of hydrogen-based technologies are related to storage technologies. The use of Metal Hydrides (MH) has been widely recognized as a potential solution thanks to their advantages in terms of high degree of safety, high volumetric storage density, comparatively low operating pressure, the possibility of operation at room temperature and relatively low cost. Since the hydrogenation and dehydrogenation of MH are respectively highly exothermic and endothermic reactions, thermal management of the storage tank is one of the most critical issues to ensure safe and effective operations.

Gasoline Direct Injection (GDI) is a leading technology for Spark Ignition (SI) engines: control of the injection process is a key to design the engine properly. The aim of this paper is a numerical investigation of the gasoline injection and the resulting development of plumes from an 8-hole Spray G injector into a quiescent chamber. A LES approach has been used to represent with high accuracy the mixing process between the injected fuel and the surrounding mixture. A Lagrangian approach is employed to model the liquid spray. The fuel, considered as a surrogate of gasoline, is the iso-octane which is injected into the high-pressure vessel filled with nitrogen. The numerical results have been compared against experimental data realized in the optical chamber. To reveal the geometry of plumes two different imaging techniques have been used in a quasi-simultaneous mode: Mie-scattering for the liquid phase and schlieren for the gaseous one.

Using natural gas in internal combustion engines (ICEs) is emerging as a promising strategy to improve thermal efficiency and reduce exhaust emissions. One of the main benefits related to the use of this fuel is that the engine can be run with lean mixtures without compromising its performances. However, as the mixture is leaned out beyond the Lean Misfire Limit (LML), several technical problems are more likely to occur. The flame propagation speed gradually decreases, leading to a slower heat release and a low combustion quality, thus increasing the occurrence of misfiring and incomplete combustions. This in turn results in a sharp increment in CO and UHC emissions, as well as in cycle-to-cycle variability. In order to limit the above-mentioned problems, different solutions have been proposed over the last decade.

Using natural gas in an internal combustion engine (ICE) is emerging as a promising way to improve thermal efficiency and reduce exhaust emissions. In the development of such engine platforms, computational fluid dynamics (CFD) plays a fundamental role in the optimization of geometries and operating parameters. One of the most relevant issues in the simulation of direct injection (DI) gaseous processes is the accurate prediction of the gas jet evolution. The simulation of the injection process for a gaseous fuel does not require complex modeling, nevertheless properly describing high-pressure gas jets remains a challenging task. At the exit of the nozzle, the injected gas is under-expanded, the flow becomes supersonic and shocks occur due to compressibility effects. These phenomena lead to challenging computational requirements resulting from high grid resolution and low computational time-steps.

A Large Eddy Simulation (LES) numerical study of the Partially Stratified Charge (PSC) combustion process is here proposed, carried out with the open Source code OpenFOAM, in a Constant Volume Combustion Chamber (CVCC). The solver has already been validated in previous papers versus experimental data under a limited range of operating conditions. The operating conditions domain for the model validation is extended in this paper, mostly by varying equivalence ratio, to better highlight the influence of turbulence on flame front propagation. Effects of grid sizing are also shown, to better emphasize the trade-off between the level of accuracy of turbulent vortex description, and their impact on the kinematics of flame propagation. Results show the validity of the approach that is evident by comparing numerical and experimental data.

The aim of this work is to carry out statistical analyses on simulated results obtained from large eddy simulations (LES) to characterize spark-ignited combustion process in a partially premixed natural gas mixture in a constant volume combustion chamber (CVCC). Inhomogeneity in fuel concentration was introduced through a fuel jet comprising up to 0.6 per cent of the total fuel mass, in the vicinity of the spark ignition gap. The numerical data were validated against experimental measurements, in particular, in terms of jet penetration and spread, flame front propagation and overall pressure trace. Perturbations in key flow parameters, namely inlet velocity, initial velocity field, and turbulent kinetic energy, were also introduced to evaluate their influence on the combustion event. A total of 12 simulations were conducted.

The aim of this work is to assess the accuracy of results obtained from Large Eddy Simulations (LES) of a partially-premixed natural gas spark-ignition combustion process in a Constant Volume Combustion Chamber (CVCC). To this aim, the results are compared with the experimental data gathered at the University of British Columbia. The computed results show good agreement with both flame front visualization and pressure rise curves, allowing for drawing important statements about the peculiarities of the Partially Stratified Combustion ignition concept and its benefits in ultra-lean combustion processes.