Search Results

Since 2000, over 200 rear seat occupants have become entangled in the seatbelt when they inadvertently switched it from emergency locking mode (ELR) to automatic locking mode (ALR). Since a method is needed to lock the seatbelt when installing child restraint systems (CRS), the National Highway Traffic Safety Administration (NHTSA) commissioned tool, inc. to develop prototype devices that could reduce the risk of seatbelt entanglement resulting from the lockability requirement. A field analysis of entanglement incidents was first conducted to inform countermeasure design. Prototype devices were developed and evaluated through testing with volunteer subjects in comparison to standard seatbelt systems by assessing how different designs would be used to install CRS, the quality of the resulting installations, how users would disentangle a trapped child surrogate, as well as to identify volunteer experience when using the belts themselves.

This study documented the position and orientation of child restraint systems (CRS) installed in the second rows of vehicles, creating a database of 486 installations. Thirty-one different CRS were evaluated, selected to provide a range of manufacturers, sizes, types, and weight limits. Eleven CRS were rear-facing only, fourteen were convertibles, five were combination restraints, and one was a booster. Ten top-selling vehicles were selected to provide a range of manufacturers and body styles: four sedans, four SUVS, one minivan, and one wagon. CRS were marked with three reference points on each moving component. The contours and landmarks of each CRS were first measured in the laboratory. Vehicle interior contours, belt anchors, and LATCH anchors were measured using a similar process. Then each CRS was installed in a vehicle using LATCH according to manufacturers' directions, and the reference points of each CRS component were measured to document the installed orientation.