Search Results

When a vehicle moves over uneven ground, motion of the sprung and unsprung masses causes dynamic shifting in the load transmitted to the ground, making the normal reaction in the tire-soil patch a continuously changing wheel parameter that may affect vehicle performance. At high loads, sinkage of the wheel can become high as the wheel digs into the soil. At low loads, the wheel can have difficulty acquiring sufficient traction. Additionally, steerability of the wheel can be diminished at very low loads. Controlling the damping forces in the suspension that is usually used to improve ride quality and stabilize motion of the sprung mass can result in an increase in the dynamic variation of the wheel normal reaction and cause vehicle performance deterioration. In this paper, a method is developed to establish boundary constraints on the dynamic normal reaction to maintain reasonable tire-terrain mobility characteristics.

In-wheel electric motors open up new prospects to radically enhance the mobility of autonomous electric vehicles with four or more driving wheels. The flexibility and agility of delivering torque individually to each wheel can allow significant mobility improvements, agile maneuvers, maintaining stability, and increased energy efficiency. However, the fact that individual wheels are not connected mechanically by a driveline system does not mean their drives do not impact each other. With individual torques, the wheels will have different longitudinal forces and tire slippages. Thus, the absence of driveline systems physically connecting the wheels requires new approaches to coordinate torque distribution. This paper solves two technical problems. First, a virtual driveline system (VDS) is proposed to emulate a mechanical driveline system virtually connecting the e-motor driveshafts, providing coordinated driving wheel torque management.

This paper presents an analysis of coupled longitudinal and lateral dynamics of a 4×4 hybrid-electric off-road vehicle (HEV) with two passive driveline systems, including drivelines with (i) an interaxle open symmetrical differential in the transfer case and (ii) a locked transfer case, i.e., positive engagement of two axles. The axle differentials are open. As the study proved, lateral dynamics of the 4×4 HEV, characterized by the tire side forces, vehicle lateral acceleration, yaw rate and tire gripping factors can be impacted by the tire longitudinal forces, whose magnitudes and directions (positive-negative) strongly depend on the driveline characteristics. At the same time, the tire side forces impact the relation between the longitudinal forces and tire slippages.