Search Results

SAIC Motor has developed an all new 2.0 L 4-cylinder turbocharged gasoline direct injection engine to meet the market demand and increasingly stringent requirement of CAFE and tail-pipe emission regulations. A series of advanced technologies have been employed in this engine to achieve high efficiency, high torque and power output, fast response low-end torque performance, refined NVH performance, all at market leading level, and low engine-out emissions. These main technologies include: side mount gasoline direct injection with 35MPa fuel injection system, integrated exhaust manifold, high tumble combustion system, 2-step intake variable valve lift (DVVL) with Miller Cycle, efficient turbo charging with electric wastegate (EWG), light weight and compact structural designs, NVH measures including balancer system with silence gear, friction reduction measures, optimized thermal management, etc.

The present paper describes a CAE analysis approach to evaluate the transient cylinder head gasket sealing performance of a turbo charged GDI engine in the bench test development. In this approach, both transient gasket sealing force and gasket wear work are calculated to allow design engineers to find out the root cause of cylinder head gasket leakage failures. In this paper, the details of the method development are described. Firstly how to use and get the cylinder head gasket property are described, which is the basic theory and data for the gasket sealing analysis. A transient heat transfer calculation for accurately simulating the engine thermal shock test is established, which is mapped to the transient gasket sealing calculation as pivotal boundary.

In order to predict more accurately the cracking failure of cylinder head during the durability test of turbocharged engine in the development, a comprehensive evaluation method of cylinder head durability is established. In this method, both high cycle and low cycle fatigue performance are calculated to provide failure assessment. The method is then applied to investigate the root cause of cracking of cylinder head and assess design optimizations. Multidisciplinary approach is adopted to optimize high cycle fatigue and low cycle fatigue performance simultaneously to achieve the best comprehensive performance. In this paper, the details of the method development are described. First, the high cycle and low cycle fatigue properties of cylinder head material were measured at different temperature condition, and the fatigue life and high temperature creep properties of materials under thermo-mechanical fatigue cycle were also tested.

The present paper describes a CAE analysis approach to evaluate the thermal-mechanical fatigue (TMF) of the cylinder head of a turbo charged GDI engine with integrated exhaust manifold. It allows design engineers to identify structural weakness at the early stage or to find the root cause of cylinder head TMF failures. At SAIC Motor, in test validation phase a newly developed engine must pass a strict durability test on test bed under thermal cycling conditions so that the durability characteristics can be evaluated. The accelerated dynamometer test is so designed that it gives equivalent cumulative damage as what would occur in the field. The duty cycle includes rated speed full load, rated speed motored and idle speed conditions. A transient none-linear finite element method is used to calculate the plastic deformation and thermal mechanical behaviors of the cylinder head assembly during thermal cycling.

The present paper describes a CAE analysis approach to evaluate the design of exhaust manifold of a turbo charged gasoline engine. It allows design engineers to identify structural weakness at the early stage or to find the root cause of exhaust manifold failures. A transient none-linear finite element method is used to calculate the plastic deformation and thermal mechanical behaviors of the exhaust manifold assembly during thermal shock cycles, which include rated speed full load, rated speed motored and idle speed conditions. A transient heat transfer simulation is performed to provide thermal boundary conditions for the nonlinear stress/strain analysis. The finite element model includes a part of cylinder head, exhaust manifold, gaskets, turbo charger housing, catalytic converter, brackets, bolts and nuts. The results show that plastic deformation is the main cause of manifold cracking and the manifold flange distortion causes the exhaust leakage.